conquer2006
Technical User
I am having difficulty doing manual install on Mitel CXi II Controller, I am getting the below errors
MITEL SYSTEM ROM R3.1/17 Feb 5 2018
CCA Number : 56009216 RC.2
System Model : 00610001 F100
CPU Model : 8360 R80480021
Reset Config Low : 08030008
Reset Config High : b4500006
Coherent System Bus Clock (MHz) : 266
CPM Clock (MHz) : 266
Core Clock (MHz) : 399
DDR Clock (MHz) : 133
Local Bus Clock (MHz) : 66
Input Clock (MHz) : 33
Internal Memory Map : f0000000
Main Memory (MB) : 1024
Local Memory (MB) : 0
Flash Memory (MB) : 2
MAC Address : 08000f524b3c
L2 Switch : 1
POST Bypass : 0
Watchdog Bypass : 0
Slot Id : 0
Starting POST...
SDRAM CS1 Data Bit Walk 1................... PASSED
SDRAM CS1 Data Bit Walk 0................... PASSED
SDRAM CS2 Data Bit Walk 1................... PASSED
SDRAM CS2 Data Bit Walk 0................... PASSED
SDRAM CS1 Address Walk 1................... PASSED
SDRAM CS1 Address Walk 0................... PASSED
SDRAM CS2 Address Walk 1................... PASSED
SDRAM CS2 Address Walk 0................... PASSED
SDRAM CS1 March Test........................ PASSED
SDRAM CS2 March Test........................ PASSED
Starting vxWorks...
Reset Cause : 0x83 - POWER_ON_RESET
VxWorks System Boot
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Mitel Embedded PPC83XX F100
Version: VxWorks5.5.2
BSP version: 3.1/17
Creation date: Feb 5 2018, 14:36:28
Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7> <6>
[VxWorks Boot]: c
Unrecognized command. Type '?' for help.
[VxWorks Boot]: c
'.' = clear field; '-' = go to previous field; ^D = quit
boot device : qefcc0
processor number : 0
host name : bootHost
file name : Boot_Install
inet on ethernet (e) : 172.24.5.6:fffffc00
inet on backplane (b):
host inet (h) : 172.24.5.7
gateway inet (g) : 172.24.5.1
user (u) : MiVB8.0_SP3
ftp password (pw) (blank = use rsh): @
flags (f) : 0x0
target name (tn) :
startup script (s) :
other (o) : qefcc
[VxWorks Boot]: c
'.' = clear field; '-' = go to previous field; ^D = quit
boot device : qefcc0
processor number : 0
host name : bootHost
file name : Boot_Install
inet on ethernet (e) : 172.24.5.6:fffffc00
inet on backplane (b):
host inet (h) : 172.24.5.7
gateway inet (g) : 172.24.5.1
user (u) : MiVB8.0_SP3
ftp password (pw) (blank = use rsh): @
flags (f) : 0x0
target name (tn) :
startup script (s) :
other (o) : qefcc FixPartition
[VxWorks Boot]: @
boot device : qefcc
unit number : 0
processor number : 0
host name : bootHost
file name : Boot_Install
inet on ethernet (e) : 172.24.5.6:fffffc00
host inet (h) : 172.24.5.7
gateway inet (g) : 172.24.5.1
user (u) : MiVB8.0_SP3
ftp password (pw) : @
flags (f) : 0x0
other (o) : FixPartition
Attached TCP/IP interface to qefcc0.
Attaching network interface lo0... done.
Loading...
Error loading file: errno = 0x880212.
MITEL SYSTEM ROM R3.1/17 Feb 5 2018
CCA Number : 56009216 RC.2
System Model : 00610001 F100
CPU Model : 8360 R80480021
Reset Config Low : 08030008
Reset Config High : b4500006
Coherent System Bus Clock (MHz) : 266
CPM Clock (MHz) : 266
Core Clock (MHz) : 399
DDR Clock (MHz) : 133
Local Bus Clock (MHz) : 66
Input Clock (MHz) : 33
Internal Memory Map : f0000000
Main Memory (MB) : 1024
Local Memory (MB) : 0
Flash Memory (MB) : 2
MAC Address : 08000f524b3c
L2 Switch : 1
POST Bypass : 0
Watchdog Bypass : 0
Slot Id : 0
Starting POST...
SDRAM CS1 Data Bit Walk 1................... PASSED
SDRAM CS1 Data Bit Walk 0................... PASSED
SDRAM CS2 Data Bit Walk 1................... PASSED
SDRAM CS2 Data Bit Walk 0................... PASSED
SDRAM CS1 Address Walk 1................... PASSED
SDRAM CS1 Address Walk 0................... PASSED
SDRAM CS2 Address Walk 1................... PASSED
SDRAM CS2 Address Walk 0................... PASSED
Starting vxWorks...
Reset Cause : 0x103 - SOFTWARE_RESET
VxWorks System Boot
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Mitel Embedded PPC83XX F100
Version: VxWorks5.5.2
BSP version: 3.1/17
Creation date: Feb 5 2018, 14:36:28
Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7> <6>
[VxWorks Boot]: c
'.' = clear field; '-' = go to previous field; ^D = quit
boot device : qefcc0
processor number : 0
host name : bootHost
file name : Boot_Install
inet on ethernet (e) : 172.24.5.6:fffffc00
inet on backplane (b):
host inet (h) : 172.24.5.7
gateway inet (g) : 172.24.5.1
user (u) : MiVB8.0_SP3
ftp password (pw) (blank = use rsh): @
flags (f) : 0x0
target name (tn) :
startup script (s) :
other (o) : FixPartition motfcc
[VxWorks Boot]: @
boot device : qefcc
unit number : 0
processor number : 0
host name : bootHost
file name : Boot_Install
inet on ethernet (e) : 172.24.5.6:fffffc00
host inet (h) : 172.24.5.7
gateway inet (g) : 172.24.5.1
user (u) : MiVB8.0_SP3
ftp password (pw) : @
flags (f) : 0x0
other (o) : motfcc
Switching other device from motfcc to qefcc...
done
Attached TCP/IP interface to qefcc0.
Attaching network interface lo0... done.
Loading...
Error loading file: errno = 0x880212.
MITEL SYSTEM ROM R3.1/17 Feb 5 2018
CCA Number : 56009216 RC.2
System Model : 00610001 F100
CPU Model : 8360 R80480021
Reset Config Low : 08030008
Reset Config High : b4500006
Coherent System Bus Clock (MHz) : 266
CPM Clock (MHz) : 266
Core Clock (MHz) : 399
DDR Clock (MHz) : 133
Local Bus Clock (MHz) : 66
Input Clock (MHz) : 33
Internal Memory Map : f0000000
Main Memory (MB) : 1024
Local Memory (MB) : 0
Flash Memory (MB) : 2
MAC Address : 08000f524b3c
L2 Switch : 1
POST Bypass : 0
Watchdog Bypass : 0
Slot Id : 0
Starting POST...
SDRAM CS1 Data Bit Walk 1................... PASSED
SDRAM CS1 Data Bit Walk 0................... PASSED
SDRAM CS2 Data Bit Walk 1................... PASSED
SDRAM CS2 Data Bit Walk 0................... PASSED
SDRAM CS1 Address Walk 1................... PASSED
SDRAM CS1 Address Walk 0................... PASSED
SDRAM CS2 Address Walk 1................... PASSED
SDRAM CS2 Address Walk 0................... PASSED
Starting vxWorks...
Reset Cause : 0x103 - SOFTWARE_RESET
VxWorks System Boot
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Mitel Embedded PPC83XX F100
Version: VxWorks5.5.2
BSP version: 3.1/17
Creation date: Feb 5 2018, 14:36:28
Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6> <5>
[VxWorks Boot]: c
'.' = clear field; '-' = go to previous field; ^D = quit
boot device : qefcc0
processor number : 0
host name : bootHost
file name : Boot_Install
inet on ethernet (e) : 172.24.5.6:fffffc00
inet on backplane (b):
host inet (h) : 172.24.5.7
gateway inet (g) : 172.24.5.1
user (u) : MiVB8.0_SP3
ftp password (pw) (blank = use rsh): @
flags (f) : 0x0
target name (tn) :
startup script (s) :
other (o) : qefcc
[VxWorks Boot]: @
boot device : qefcc
unit number : 0
processor number : 0
host name : bootHost
file name : Boot_Install
inet on ethernet (e) : 172.24.5.6:fffffc00
host inet (h) : 172.24.5.7
gateway inet (g) : 172.24.5.1
user (u) : MiVB8.0_SP3
ftp password (pw) : @
flags (f) : 0x0
other (o) : qefcc
Attached TCP/IP interface to qefcc0.
Attaching network interface lo0... done.
Loading...
Error loading file: errno = 0x880212.
MITEL SYSTEM ROM R3.1/17 Feb 5 2018
CCA Number : 56009216 RC.2
System Model : 00610001 F100
CPU Model : 8360 R80480021
Reset Config Low : 08030008
Reset Config High : b4500006
Coherent System Bus Clock (MHz) : 266
CPM Clock (MHz) : 266
Core Clock (MHz) : 399
DDR Clock (MHz) : 133
Local Bus Clock (MHz) : 66
Input Clock (MHz) : 33
Internal Memory Map : f0000000
Main Memory (MB) : 1024
Local Memory (MB) : 0
Flash Memory (MB) : 2
MAC Address : 08000f524b3c
L2 Switch : 1
POST Bypass : 0
Watchdog Bypass : 0
Slot Id : 0
Starting POST...
SDRAM CS1 Data Bit Walk 1................... PASSED
SDRAM CS1 Data Bit Walk 0................... PASSED
SDRAM CS2 Data Bit Walk 1................... PASSED
SDRAM CS2 Data Bit Walk 0................... PASSED
SDRAM CS1 Address Walk 1................... PASSED
SDRAM CS1 Address Walk 0................... PASSED
SDRAM CS2 Address Walk 1................... PASSED
SDRAM CS2 Address Walk 0................... PASSED
Starting vxWorks...
Reset Cause : 0x103 - SOFTWARE_RESET
VxWorks System Boot
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Mitel Embedded PPC83XX F100
Version: VxWorks5.5.2
BSP version: 3.1/17
Creation date: Feb 5 2018, 14:36:28
Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6><5><4><3><2><1><0>
auto-booting...
boot device : qefcc
unit number : 0
processor number : 0
host name : bootHost
file name : Boot_Install
inet on ethernet (e) : 172.24.5.6:fffffc00
host inet (h) : 172.24.5.7
gateway inet (g) : 172.24.5.1
user (u) : MiVB8.0_SP3
ftp password (pw) : @
flags (f) : 0x0
other (o) : qefcc
Attached TCP/IP interface to qefcc0.
Attaching network interface lo0... done.
Loading... 10916176
Starting at 0x10000...
0x3f7ffe00 (tRootTask): Warning: directory changed via cd to /sysro
->
Last reset cause was (0x103) SOFTWARE_RESET
Creating block device for controller 0 drive 0... done.
Creating CBIO device for controller 0 drive 0... done.
ataGetDiskSize(0,0) = 76319MB
40G/80G drive partitioning scheme
Disk Configuration Started.
ctrl = 0, drive = 0 available disk space = 78150744KB
1677721KB added to /inactive/sysro partition
free disk space after partition 0 is 76473023KB
8598323KB added to /inactive/db partition
free disk space after partition 1 is 67874700KB
14680064KB added to /vmail partition
free disk space after partition 2 is 53194636KB
1677721KB added to /sysro partition
free disk space after partition 3 is 51516915KB
8598323KB added to /db partition
free disk space after partition 4 is 42918592KB
0KB added to /unused partition
free disk space after partition 5 is 42918592KB
disk space left after the first pass is 42918592KB
adding 42918592KB to /unused partition, (index 5)
Controller 0 drive 0 will be repartitioned according to these parameters:
partition 0 (/inactive/sysro)
-----------------------------
min_size = 1677721 K
max_size = 1677721 K
priority = 1
percent = 0%
format = TRUE
test = TRUE
label = TRUE
kbytes = 1677721 K
real percent = 2%
partition 1 (/inactive/db)
--------------------------
min_size = 8598323 K
max_size = 8598323 K
priority = 2
percent = 0%
format = TRUE
test = TRUE
label = TRUE
kbytes = 8598323 K
real percent = 11%
partition 2 (/vmail)
--------------------
min_size = 14680064 K
max_size = 14680064 K
priority = 3
percent = 0%
format = TRUE
test = TRUE
label = TRUE
kbytes = 14680064 K
real percent = 19%
partition 3 (/sysro)
--------------------
min_size = 1677721 K
max_size = 1677721 K
priority = 4
percent = 0%
format = TRUE
test = TRUE
label = TRUE
kbytes = 1677721 K
real percent = 2%
partition 4 (/db)
-----------------
min_size = 8598323 K
max_size = 8598323 K
priority = 5
percent = 0%
format = TRUE
test = TRUE
label = TRUE
kbytes = 8598323 K
real percent = 11%
partition 5 (/unused)
---------------------
min_size = 0 K
max_size = 0 K
priority = 6
percent = 0%
format = TRUE
test = TRUE
label = TRUE
kbytes = 42918592 K
real percent = 55%
Attaching to partition table for 6 partitions on controller 0 drive 0... done.
Creating Cache Layer for partition 0 (/inactive/sysro) on controller 0 drive 0... done.
Creating Cache Layer for partition 1 (/inactive/db) on controller 0 drive 0... done.
Creating Cache Layer for partition 2 (/vmail) on controller 0 drive 0... done.
Creating Cache Layer for partition 3 (/sysro) on controller 0 drive 0... done.
Creating Cache Layer for partition 4 (/db) on controller 0 drive 0... done.
Creating Cache Layer for partition 5 (/unused) on controller 0 drive 0... done.
Creating Dos FS device for partition 0 (/inactive/sysro) on controller 0 drive 0... done.
Creating Dos FS device for partition 1 (/inactive/db) on controller 0 drive 0... done.
Creating Dos FS device for partition 2 (/vmail) on controller 0 drive 0... done.
Creating Dos FS device for partition 3 (/sysro) on controller 0 drive 0... done.
Creating Dos FS device for partition 4 (/db) on controller 0 drive 0... done.
Creating Dos FS device for partition 5 (/unused) on controller 0 drive 0... done.
Formatting partition 0 (/inactive/sysro) on controller 0 drive 0... Retrieved old volume params with %95 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 0 clusters, 152639 sectors per FAT
Sectors reserved 32, hidden 0, FAT sectors 305278
Root dir entries 0, sysId (null) , serial number 69747261
Label:" " ...
Disk with 156301488 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 19499522 clusters, 152639 sectors per FAT
Sectors reserved 32, hidden 0, FAT sectors 305278
Root dir entries 0, sysId VX5DOS32, serial number 69747261
Label:" " ...
done.
Formatting partition 1 (/inactive/db) on controller 0 drive 0... Retrieved old volume params with %-1 confidence:
Volume Parameters: FAT type: FAT0, sectors per cluster 0
0 FAT copies, 0 clusters, 0 sectors per FAT
Sectors reserved 0, hidden 0, FAT sectors 0
Root dir entries 0, sysId (null) , serial number 0
Label:" " ...
Disk with 0 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 536870911 clusters, 0 sectors per FAT
Sectors reserved 1, hidden 0, FAT sectors 0
Root dir entries 0, sysId VXDOS12 , serial number 0
Label:" " ...
dosFsVolFormat: bad format parameters, errno = 0x16
ERROR: In usrAtaConfigExtended() failed to format partition 1 (/inactive/db) on controller 0 drive 0: errno = 16
0xcc1e80 (): task deadWarning: directory changed via cd to /sysro
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
Initiating transfer via remote FTP server to read UpgradeMain.out. Attempt 1 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
write() of0x the local file hacc1800s returned an (errortRTC_SWinstallError in reading ): UpgradeMain.outD:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
file.
File transfer failure.
Initiating transfer via remote FTP server to read UpgradeMain.out. Attempt 2 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() of the local file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
Initiating transfer via remote FTP server to read UpgradeMain.out. Attempt 3 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() of the local file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
Initiating transfer via remote FTP server to read upgrademain.out. Attempt 1 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() of the local file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
Initiating transfer via remote FTP server to read upgrademain.out. Attempt 2 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() of the local file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_undefined symbol: reading
-> 14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-> write() of the local file has returned an errorError in reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_undefined symbol: reading
-> 14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-> write() of the local file has returned an errorError in reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_undefined symbol: reading
-> 14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-> write() of the local file has returned an errorError in reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> Initiating transfer via remote FTP server to read upgrademain.out. Attempt 3 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() of the local file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
ERROR fetching UpgradeMain.out from ftp server
->
-> VxWorks System Boot
Copyright 1984-2002 Wind River Systems, Incundefined symbol: System
-> .
value = 0
->
->
->
->
->
-> CPU: Mitel Embedded PPC83XX F100
Version: VxWorks5.5.2
Bundefined symbol: CPU
-> SP version: 3.1/17
Creation date: Feb 5 2undefined symbol: SP
-> 018, 14:36:28
invalid number: 018
->
->
->
->
-> Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6><5><4><3><2><1><0undefined symbol: Press
-> >
can't create output ''
errno = 0xc0007
-> auto-booting...
boot device undefined symbol: auto
-> : qefcc
syntax error
-> unit number : 0
processor number : 0
host name "number" is overloaded - Please select:
: 1: List<Key *>::number(void) const
2: List<OutputterObj *>::number(void) const
3: List<Str *>::number(void) const
4: List<DStr *>::number(void) const
5: List<TokenItem *>::nbootHost
file name : Boot_Install
inet on ethernet (e) : 172.24..6:fffffc00
host inet () : 172.24..7
gateway inet (g) : 172.24.5.1
user (u) : MiVB8.0_P3
ftp passord (pw)
flags (f) : 0x0
other (o) : qfcc
Attached TCP/IP interface to qefcc0.
Attaching network iterface lo0... done.
Loading... 10916176taumber(void) const
6: List<FrontMatterItem *>::number(void) const
7: List<SortDef *>::number(void) const
8: List<VarBindingItem *>::number(void) const
9: List<RuleItem *>::number(void) const
10: List<PhrasePhrase *>::number(void) const
11: List<DataLineItem *>::number(void) const
12: List<QName *>::number(void) const
13: List<void *>::number(void) const
14: List<NamespaceStackObj *>::number(void) const
15: List<OutputHistoryItem *>::number(void) const
16: List<VarBindings *>::number(void) const
17: List<EQNameStr *>::number(void) const
18: List<ConvInfo *>::number(void) const
19: List<Vertex *>::number(void) const
20: List<EQName *>::number(void) const
21: List<StrStr *>::number(void) const
22: List<DecimalFormat *>::number(void) const
23: List<HashItem *>::number(void) const
24: List<int>::number(void) const
25: List<Expression *>::number(void) const
Enter <number> to select, anything else to stop: underting at 0x10000...
0x3fined symbol: number
-> f7ffe00 (tRootTask): Warning: directory changed via cd to /sysro
->
Last reset cause wasundefined symbol (0x13) SOFTWARE_RESET
Creating block device fo controller 0 drive 0... done.
Creating CIO device for controller 0 drive 0... done.
ataGetDiskSize(0,0) = 76319MB
40G/80G drive patitioning scheme
Disk Configuration Started
ctrl = 0, drive = 0 available disk space = 78150744KB
1677721KB added to /inactivesysro partition
free disk space after partition 0 is 76473023KB
8598323KBaded to /iac: f7ffe00
-> tive/db partition
free disk space after pundefinedartition 1 is 6787700B
14680064KB added to /vmail partition
free disk space afte partition 2 is 53194636KB
1677721KB added to /sysro parition
free disk space after partition 3 is 51516915KB
8598323KB added to /db partitio
free disk space after partition s 42918592KB
0KB added to /nused partition
free disk space after partition 5 is 42918592KB
disk space left after the first pas is 4291852K symbol: tive
-> B
adding 42918592KB to /uundenused partition, (inex 5)
Controller 0 drve 0 will be repartitioned according to these parameter:
partition 0 (/inactive/syso)
-----------------------------
min_size = 1677721 K
max_ize = 1677721 K
priority = 1
perent = 0%
format = TRUE
test = TRUE
label = TRUE
kbytes = 1677721 K
ral percent = 2%
fined symbol: B
-> partition 1 (/inactive/db)
---------------un-----------
in_size = 8598323 K
max_size = 8598323 K
priority = 2
percent = 0%
format = TRUE
test =TRUE
label = TRUE
kbtes = 8598323 K
real percent =11%
partition 2 (/vmil)
-------------------
min_size = 14680064 K
max_size = 14680064 K
priority = 3 percent = 0%
defined symbol: partition
-> format = TRUE
test = TRUE
"format" is label = TRUE
kbytes = 14680064 K
real pecent = 19%
partitin 3 (/sysro)
-------------------
min_size = 1677721 K
max_size = 167721 K
prioriy = 4
percent=0%
format = TRUE
test = TRUE
ael = TRUE
kbytes = 1677721 K
real percet = 2%
partition 4 (/b)
------ overloaded - Please select:
1: DecimalFormat::format(Situation &, Number &, Str const &, Str &)
2: DecimalFormatList::format(Situation &, EQName const &, Number &, Str const &, Str &)
Enter <number> to select, anything else to stop: undefined symbol: TRUE
-> ----------
syntax error
- min_size = 8598323 K
max_size =8598323 K
piority = 5
perent = 0%
fomat = TRUE
et = TRUE
label = TRE
kbytes = 859832 K
real percent =11%
partition 5 (/unused)
--------------------
min_size = 0 K
max_size = 0 K
priority = 6
percent = 0%
format = TRUE
test = TRUE
> label = TRUE
kbytes = 42918syntax error
-> 592 K
real percent = val55%
Ataching to patition table for 6 partitions n controller 0 drive 0... doe.
Creating Cache Laer for partition 0 (/inactive/sysro) on cntroller 0 drive 0.. done.
Creating Cah Layer for partition 1 (/iactive/db) on controller 0dive 0... done.
Creating Cache ayer for partition 2 (/vmail) on controller 0 drive ... done.
Creating Cach Layer for partition3 (/sysro) on controler 0 drive0.ue = 592 = 0x250
undefined symbol: K
-> .. done.
invalid Creating Cache Layer for partition 4 (/db on controller 0 drive 0... doe
Creating Cache Layer for partition 5 (/unused) on controller 0 drive 0... one.
Creating Dos FS device for partition 0 (/inactive/sysro) on controller 0 drive 0... done.
Creating Dos FS device for partition 1 (/inactive/db) on controller 0 rive 0... done.
Creating Dos FS device for partition 2 (/vmail) on controller 0 drive 0... done.
Creating Dos S number: ..
-> device for partition 3 (/sysro) on controller 0 drive 0... done.
Creating Dos FS device for partition 4 (/db) oundefi controller 0 drive 0... done.Creating Dos FS device for partition 5 (/unused) on controller 0 drive 0... done.
Formatting partition 0 (/inactive/sysro) on controller 0 drive 0... Retrieved old volum params with %95 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 0 clusters, 152639 sectors per FAT
Sectors reserved 32, hidden0, FAT sectrned symbol: for
-> s 305278
Root diTasr entries 0, sysId (null) , serial number69747261
Label:" " ...
Disk with 156301488 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 19499522 clusters, 152639 sectors per FAT
Sectors reserved 32, hidden 0, FAT sectors 305278
Root dir etries 0, sysId VX5DOS32, serial number 69747261
Label:" " ...
done.
Formattingpak not found
value = -1 = 0xffffffff
-> rtition 1 (/inactive/db) on controller 0 drive 0... Retrieved old volume params with %-1 confidence:
Volume Parameters: FAT uype: FAT0, ectors per cluster 0
0 FAT copies, 0 clusters, 0 sectors per FAT
Sectors reserved 0, hidden 0, FAT sectors 0
Root direntries 0, sysId (null) , serial number 0
Label:" " ...
Disk with 0 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT32, sectors pr cluster 8
2 FAT copies 53687911 clusters, 0 sectors er FAT
Sectors reserved 1, hiddn ndefined symbol: rtition
-> 0, FAT sectors 0
value = 0 = 0x Root dir entries 0, sysId VXDOS12 , serial number 0
Label:" " ...
dosFsVolForat: bad format parameters, errno = 0x16
ERROR:In usrAtaConfigExtended() failed to format partition 1 (/inactive/db) on controller 0 drive 0: errn = 16
0xcc1e80 (): task dadWarning: directory changed via cd to /sysro
0xcc1800 (tTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c: 0
syntax error
-> ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_undefined sy4.0_B2_CMView2/System/vxImage/vxImgCommon/vxImgCommon_Sc/dosFsLib.c : media not formatted or not present
Initiating transfer via remote FTP server to read UpgradeMain.out. Attempt 1 of 3
0xcc1800 (tRTC_SWinstall): D:/MViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
write() of0x the local file hacc1800srembol: reading
-> turned an (errortRTC_SWinstallError in reading ): UpgradeMain.outD:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon
file.
File transfer failure.
Initiating transunder via remote FTP server to read UpgradeMain.out. Attempt 2of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_1.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() efined symbol: an
-> of the local file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
Initiating transfer via remote FTP server to reundefined symbol: ld UpgraeMain.out. Attempt 3 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not presentwrite() of th ocal
-> local file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
Initiating transfer viaundefined symremote FTP server to read upgrademain.out. Attempt of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() of th bol: file
-> local file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
Initiating transfer viaundefineremote FTP server to read upgrademain.out. Attempt2 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() of th d symbol: file
-> local file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
ERROR reading the deviunde boot sector
0xcc1800 (tRTC_SWinstall): D:/CMView/ICP3300_undefined symbol: reading
-> 14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-> write() of the local file has returned an errorError in reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> ERROR reading the device boot sector0efined symbol: file
-> xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_undefined symbol: reading
-> 14.0_B2_CMView2/Systundefined symbol:em/vxImages/vxIgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not presentinvalid number: 14.0_
-> write() of the local file has returned an errorError in reading UpgradeMain.out file.
value = 0 = 0x0
syntaxerror
-> ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_undefined sybol: reading
> 14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Sr/ xcc1800
-> dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-invalid n> write() of the local file has returned an errorError in reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> Initiating transfer via remote FTP server to read upgrademain.out. Attempt 3 of 3
0xcc1800 (tRTC_SWnstall): D:/CMViws/ICP3300_1.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc800 (tRTC_SWinstall): D:/CMViews/ICP330014umber: .c
-> .0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
invaliwrite() of the local file has returned an errorError in reading UpgradeMai.out file.
File transfer failre.
ERROR fetching UpgradeMain.out from ftp server
d number: .0_
-> max_size = 0 K
priority = 6
"max_size" is overloaded - Please select:
1: list<MiBufferPoolIF *, allocator<MiBufferPoolIF *> >::max_size(void) const
2: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::max_size(void) const
Enter <number> to select, anything else to stop: percent = 0%
new symbol "max_size" added to symbol table.
formmax_size = 0x3cd83d88: value = 0 = 0x0at = TRUE
undefined symbol: K
-> test = TRUE
> label = TRUE
undefined symbol: TRUE
->
-> kbytes = 42918syntax error
-> 592 K
real pinvalid number: 42918s
-> ercent = val55%
Ataching to patition table for 6 partitions nundefined symbol: val55
-> controller 0 drive 0... doe.
Creating Cache Laer forundefined symbol: controller
-> partition 0 (/inactive/sysro) on cntroller 0 drive 0.. done.
Creating Cah Layer for undefpartition 1 (iactive/db) on controller 0dive 0... done.
Creating Cah ayer for partition (/vmail) on controller0 drive ... done.
Creating Cach Layer for parttion (/sysro) on controler 0 drive0.ue = 52 = 0x250undefined symbol: K
-> .. done.
invald Creating Cache Lae for partition 4 (/db on controller 0 drive 0... doe
Creating Cache Layer for partition 5 (/unused) oncontroller 0 drive 0...onined symbol: partition
-> e.
No breakpoints
vreating Dos FS device for partition 0 (/inactive/sysro) on controller 0 drive 0... done.
Creating Dos FS device for partition 1 (/iactive/db) on controller 0 rive 0... done.
Creating Dos FS device for partition 2 (/vmail) on controller 0 drive 0... done.
Creating Dos S number: ..
-> device for partitio 3 (/sysro) n controller 0 drive 0... done.
Creating Dos FS device for partition 4 (/db) oundefi controller 0 drive 0...doalue = 0 = 0x0
-> ne.Creating Dos FS device for partition 5 (/unused) on controller 0 drive 0... done.
Formatting partition 0 invalid num/inactive/sysro) on controller 0 drive ... Retrieved old volum params with %95 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 0 clusters, 152639 sectors per FAT
Secors reserved 32, hidden0, AT sectrned symbol: for
-> s 305278
Root diTasr entries 0, sysId (null) , serial number69747261
Label:" " ...
Disk with 156301488 sectors of 512bytes wlber: .C
-> l be formatted with:
Volume Parameters: FAT type: FAT32, sectors peundefined s cluster 8
2 FAT copies, 19499522 clusters, 152639 sectors per FAT
Sectors reserved 32, hidden 0, FAT sectors 305278
Root dir etries 0, sysId VX5DOS32, serial number 6947261
Label:" " ...
done.
Formattingpaknot found
value = -1 = 0xffffffff
-> rtition 1 (/inactive/db) on cotroller 0 drive 0... Retrieved old volume params with %-1 confience:
Volume Paraetymbol: formatted
-> ers: FAT uype: FAT0, ectors per cluster 0
0 FAT copies, 0 clusters, 0 sectors per FAT
Sectors reserved 0, hidden 0, FAT sectos 0
Root direntries 0, sysId (null) , serial number 0
Label:" " ...
Disk with 0 sectors of 512 btes will be formatted with:
Volume Parameters: FAT type: FA32, sectors pr cluster 8
2 FAT opies 53687911 clusters, 0 sectors er FAT
Secors reserved 1, hiddn ndefined symbol: rtition
-> 0, FAT sectors 0
value = 0 = 0x ooundefined symbol: ers
-> t dir entries 0, sysId VXDOS12 , serial number 0
Label:" " ."t" is overload..
dosFsVolForat: bad forma parameters, errno = 0x16
ERROR:In usrAtaConfgExtended() failed to format partition 1 (/inactive/db) on controller 0 drive : errn = 16
0xcc1e80 (): task dadWarning: directory chaned via cd to /sysro
0xcc1800 (tTC_SWinstall): D:/CMViewsICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c: 0
syntax error
-> ERRR reading the deviceboot sector
xced - Please select:
1: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
2: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int) const
3: string_char_traits<char>::lt(char const &, char const &)
Enter <number> to select, anything else to stop: c1800 (tRTC_SWinstalundefined sl): :/ymbol: dir
-> CMViews/ICP3300_undefined sy4.0_B2_CMView2/System/vxImage/vxImgCommon/vxImgCommon_Sc/dosFsLib.c : media not formatted or not pre
Initiating transfer viaundefremote FTP server to read UpgradeMain.out. Attempt 1 of 3
0xcc1800 (tRTC_SWinstall): D:/MViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR readig the device boot sector
write() of0x the local file hacc1800srembol: reading
-> turned an (errortRTC_SWinstallError in reading ): UpgradeMain.outD:/CMViews/ICP300_14.0_B2_CMView2/System/vxImages/vxImgCommon
file.
Fiined symbol: CMViews
-> le transfer failure.
Initiating transunder via remote FTP server toundefined symbol: read UpgradeMain.out. Attempt 2of 3
0xcc1800 (tRTC_SWinsall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_1.0_B2_CMView2/System/vxImges/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() efined symbol: an
-> of the locle
-> al file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
Initiating transfer viaundefined symboremote FTP server to reundefine symbol: ld UpgraeMain.out. Attempt 3 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formated or not presel: file
-> write() of th ocal
-> local file has returvalue = 0 =ned an rrorError in reading UpradeMain.out file.
File transfer failure.
Initiating transfer viaundefined symremote FTP server to read upgrademain.out. Attempt of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading he device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCo 0x0
syntax error
-> mmon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() of th bol: fileundefine
-> local file has returned an erroError in reading UpgradMain.out file.
File transfer failure.
Initiating transfer viaundefineremote FTP server to read upgrademain.out. Attempt2 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMiew2/yd symbol: mmon
-> stem/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() of th d symbol:undfile
-> local file has returned an errorError in eading UpgradeMain.out file.
File transfer failure.
ERROR reading the deviunde boot sector
0xcc1800 (tRTC_SWintall): D:/CMView/ICP3300_undefined symbol: reading
-> 14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-> write() of the local file has returned an erroError inefined symbol: stem
-> reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> ERROR readingundefined symbol: the device boot sector0efined symbol: file
-> xcc1800 (tRTC_SWinstall):/CMViews/ICP3300_undeined symbol: reading
-> 14.0_B2_CMView2/Systundefined symbol:em/vxImages/vxIgCommon/vxImgCommon_Src/dosFsLib.c: media not formatted or not presentinvalid number: 14.0_
-> write() of the local file has returned an errorError in reading UpgradeMin.out file.
value = 0 = 0x0
syntaxerorUpgradeMain
->
-> -> ERROR reading the device boot sector
syn0xcc1800 tRTC_SWinstall):/CMViews/IC3300_undefined sybol: reading
> 14.0_B2_CMView2/System/vxImages/vxImgCommon/vxmgCommon_Sr/ xcc1800
-> dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-invalid n> write() of the local file has returned an errorError in reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> Initiating transfer via remote FTP server to read upgrademain.out. Attempt 3 of 30xtax error
-> cc1800 (tRTC_SWnstall): D:/CMViws/ICP3300_1.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading
0xcc800 (tRTC_SWinstallundefi: D:/CMViews/ICP330014umber: .c
-> .0_B2_CMView2/System/vxImages/vxImgCommon/vxImgComon_Src/dosFsLib.c : mdia not formatted or not present
invaliwrite() of the local file has returned an errorError in reading UpgradeMai.ut file.
Filetransfer failre.
ERROR fetching UpgradeMain.out from ftp server
d number: .0_
->
ned symbol: cc1800
-> partition 1 (/inactive/db) on controller 0 drive : errn = 16
0xcc1e80 (): task dadWaundefined symbol: partition
-> rning: directory chaned via cd to /sysro
0xcc1800 (tTC_SWinstallundefined symbol: rning
-> ): D:/CMViewsICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c: 0
syntax error
-> syntax error
-> ERRR reading the devundefined symbol: syntax
-> iceboot sector
xced - Please select:
1: basic_string<charundefined symbol: sector
-> , string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
syntax error
-> 2: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int) const
value = 2 = 0x2 3: st
syntax error
-> ring_char_traits<char>::lt(char const &, char const &)
Enter <number> to selecundefined symbol: ring_char_traits
-> t, anything else to stop: c1800 (tRTC_SWinstalundefined sl): :/ymbol: dir
-> CMViews/ICP3300_unde"t" is overloaded - Please select:
1: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
2: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int) const
f 3: string_char_traits<char>::ned sy4.0_B2_CMView2/System/vxImage/vxImgCommon/vxImgCommon_Sc/dosFLib.c : media not formatted or not pre
Initiating transferviaundefremote FTP server to read UpgradeMain.out. Attempt 1 of 3
0xcc1800 (tRTC_SWinstall): D:/MViews/ICP3300_14.0_B2_CMView2/System/vImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR readig the device boot sector
write() of0x the local file hacc1800srembol: reading
-> urlt(char const &, char const &)
Enter <number> to select, anything else to stop: undefined symbol: t
-> ned an (errortRTC_SWinstallError in reading ): UpgradeMain.outD:/CMViews/ICP300_14.0_B2_CMView2/System/vxImages/vxImgCommon
file.
Fiined symbol: CMViews
-> le transfer fundefined symbol: ailure.
Iitiating transunder via remote FTP server toundefined symbol: read UpgradeMain.out. Attempt 2of 3
0xcc1800 (tRTC_SWinsall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device bot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_1.0_B2_CMView/System/vxImges/vxImgCommon/vxImgCommon_Src/dosFsLib.c : medin
-> a not formatted or not present
write() efined symbol: an
-> of the locle
-> aundefined symbo file has returned an errorError in readin UpgradeMain.out file.
File transfer failure.
Initiating transfer viaundefined symboremote FTP server to reundefine symbol: ld UpgraeMain.out. Attempt 3 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstal)l: not
-> : D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formated or not presel:
syntax e-> write() of th ocal
-> local file has returvlue = 0 =ned an rrorError in reading UpradeMain.out file.
File transfer failure.
Initiating transfer viaundefined symremote FTP server o read upgrademain.out. Attempt of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading he device boot sctor
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_rror
-> CMView2/System/vxImages/vxImgCo 0x0
syntax error
-> mmon/vxundefined symImgCommon_Src/dosFsLib.c : edia not formatted or not present
write() of th bol: fileundefine
-> local file ha returned an erroError in reading UpgradMain.out file.
File transfer failure.
Initiating transfer viaundefineremoteFTP server to read upgrademain.out. Attempt2 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR radbol: CMView2
-> ing the device boot sector
0xcc1800 (tRTC_SWinstal"ing"l):/CMViews/IC3300_14.0_B2_CMiew2/yd symbol: mmon
-> stem/vxImages/vxImgCommon/vxImgCommon_Src/dossLib.c : media not formatted or not present
write() of th d symbol:undfile
-> local file has returned a errorError in eading UgradeMain.out file.
File transfer failure.
ERROR reading the deviunde boot sector
0xcc1800 (tRTC_SWintall): D:/CMView/ICP3300_undefined symbol: reading
-> 14.0_B2_CMView2Sy is overloaded - Please select:
1: CDSRemoteDispatcher:ing(void)
2: CDSProxyIDSRemoteDispatcherSkel:ing(void)
Enter <number> to select, anything else to stop: undefined symbol: the
-> stem/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-undefine write() of the local file has returned anerroError inefined symbl: stem
-> reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> ERROR readingundefined symbol: the evice boot sector0efined symbol: file
-> xcc1800 (tRC_SWinstall):/CMViews/ICP3300_undeined symbol: reading
-> 14.0_B2_CMView2/Systundefined ymbol:em/vxImages/vxIgCommon/vxImgCommon_Src/dosFsLib.c: media not formtted or nod symbol: stem
-> t presentinvalid number: 14.0_
-> write() of the local"t" file hs returned an errorErrr in reading UpgradeMin.out file.
value = 0 = 0x0
syntaxerorUpgradeMain
->
-> -> RROR reading the device boot sector
syn0xcc1800 tRC_SWinstall)::/CMViews/IC3300_undefined sybol: reading
> 14.0_B2_CMView2/System/vxImages/vImgCommon/vxmgCommon_Sr/ xcc1800
-> dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-invalid n> write() of the local filehais overloaded - Please select:
1: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
2: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int) const
3: string_char_traits<char>::lt(char const &, char const &)
Enter <number> to select, anything else to stop: s returned an errorEundefined symbol: prror in reading UpgradeMain.out file.
value = 0 = x0
syntax errr
resentinvalid
-> -> Initiating transfer via remote FTP server to read upgrademain.out. Attempt 3 of 30xtax error
synt-> cc1800 (tRTC_SWnstall): D:/CMViws/ICP3300_1.0_B2_CMView2/SystemvxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading
0xcc800 (tRTC_SWinstallundefi: D:/CMViews/ICP330014umber: .c
-> .0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCmon_Src/dosFsLib.c : mdia not formatted or not present
invaliwrite() of the local file has returned an errorError in reading UpgradeMai.ut fie.
Filetranser failre.
ERRR fetching Upgraax error
-> deMain.out from ftp server
d number: .0_
->
ned syinvalid numbol: cc180
->
mber: .o
-> partition 1 (/inactive/db) on controller 0 drive : errn = 16
0xcc1e80 (): task dadWaundefined symbol: partition
-> rning: directory chaned via cd to /sysro
0xcc1800 (tTC_SWinstallundefined symbol: rning
-> ): D:/CMViewsICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c: 0
syntax error
-> syntax error
-> ERRR reading the devundefined symbol: syntax
-> iceboot sector
xced - Please select:
1: basic_string<charundefined symbol: sector
-> , string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
syntax error
-> 2: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int) const
value = 2 = 0x2 3: st
syntax error
-> ring_char_traits<char>::lt(char const &, char const &)
Enter <number> to selecundefined symbol: ring_char_traits
-> t, anything else to stop: c1800 (tRTC_SWinstalundefined sl): :/ymbol: dir
-> CMViews/ICP3300_unde"t" is overloaded - Please select:
1: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
2: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int) const
f 3: string_char_traits<char>::ned sy4.0_B2_CMView2/System/vxImage/vxImgCommon/vxImgCommon_Sc/dosFLib.c : media not formatted or not pre
Initiating transferviaundefremote FTP server to read UpgradeMain.out. Attempt 1 of 3
0xcc1800 (tRTC_SWinstall): D:/MViews/ICP3300_14.0_B2_CMView2/System/vImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR readig the device boot sector
write() of0x the local file hacc1800srembol: reading
-> urlt(char const &, char const &)
Enter <number> to select, anything else to stop: undefined symbol: t
-> ned an (errortRTC_SWinstallError in reading ): UpgradeMain.outD:/CMViews/ICP300_14.0_B2_CMView2/System/vxImages/vxImgCommon
file.
Fiined symbol: CMViews
-> le transfer fundefined symbol: ailure.
Iitiating transunder via remote FTP server toundefined symbol: read UpgradeMain.out. Attempt 2of 3
0xcc1800 (tRTC_SWinsall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device bot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_1.0_B2_CMView/System/vxImges/vxImgCommon/vxImgCommon_Src/dosFsLib.c : medin
-> a not formatted or not present
write() efined symbol: an
-> of the locle
-> aundefined symbo file has returned an errorError in readin UpgradeMain.out file.
File transfer failure.
Initiating transfer viaundefined symboremote FTP server to reundefine symbol: ld UpgraeMain.out. Attempt 3 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstal)l: not
-> : D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formated or not presel:
syntax e-> write() of th ocal
-> local file has returvlue = 0 =ned an rrorError in reading UpradeMain.out file.
File transfer failure.
Initiating transfer viaundefined symremote FTP server o read upgrademain.out. Attempt of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading he device boot sctor
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_rror
-> CMView2/System/vxImages/vxImgCo 0x0
syntax error
-> mmon/vxundefined symImgCommon_Src/dosFsLib.c : edia not formatted or not present
write() of th bol: fileundefine
-> local file ha returned an erroError in reading UpgradMain.out file.
File transfer failure.
Initiating transfer viaundefineremoteFTP server to read upgrademain.out. Attempt2 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR radbol: CMView2
-> ing the device boot sector
0xcc1800 (tRTC_SWinstal"ing"l):/CMViews/IC3300_14.0_B2_CMiew2/yd symbol: mmon
-> stem/vxImages/vxImgCommon/vxImgCommon_Src/dossLib.c : media not formatted or not present
write() of th d symbol:undfile
-> local file has returned a errorError in eading UgradeMain.out file.
File transfer failure.
ERROR reading the deviunde boot sector
0xcc1800 (tRTC_SWintall): D:/CMView/ICP3300_undefined symbol: reading
-> 14.0_B2_CMView2Sy is overloaded - Please select:
1: CDSRemoteDispatcher:ing(void)
2: CDSProxyIDSRemoteDispatcherSkel:ing(void)
Enter <number> to select, anything else to stop: undefined symbol: the
-> stem/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-undefine write() of the local file has returned anerroError inefined symbl: stem
-> reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> ERROR readingundefined symbol: the evice boot sector0efined symbol: file
-> xcc1800 (tRC_SWinstall):/CMViews/ICP3300_undeined symbol: reading
-> 14.0_B2_CMView2/Systundefined ymbol:em/vxImages/vxIgCommon/vxImgCommon_Src/dosFsLib.c: media not formtted or nod symbol: stem
-> t presentinvalid number: 14.0_
-> write() of the local"t" file hs returned an errorErrr in reading UpgradeMin.out file.
value = 0 = 0x0
syntaxerorUpgradeMain
->
-> -> RROR reading the device boot sector
syn0xcc1800 tRC_SWinstall)::/CMViews/IC3300_undefined sybol: reading
> 14.0_B2_CMView2/System/vxImages/vImgCommon/vxmgCommon_Sr/ xcc1800
-> dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-invalid n> write() of the local filehais overloaded - Please select:
1: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
2: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int) const
3: string_char_traits<char>::lt(char const &, char const &)
Enter <number> to select, anything else to stop: undefined symbol: presentinvalid
-> s returned an errorError in reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> Initiating traundefsfer via remote FTP server to read ugrademain.out. Attempt 3 of 30xtax error
-> cc1800 (tRTC_SWnstall): D:/CMViws/ICP3300_1.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading
0xcc800 (tRTC_SWinstallundefi: D:/CMViews/ICP330014umber: .c
-> .0_B2_CMView2/System/vxImages/vxImgCommon/vxImComon_Src/dosFsLib.c : mdia not formatted or not present
inalined symbol: an
-> iwrite() of the local file has returned an errorError in reading UpgradeMai.ut file.
ailre.
ERROR fetching Upundefined symgradeMain.out from ftp server
d number: .0_
->
ned symbol: cc1800
->
partition 1 (/inactive/db) on controller 0 drive : errn = 16
0xcc1e80 (): task dadWarning: directory chaned via cd to /sysro
0xcc180 (tTC_SWinstall): D:/CMViewsICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c: 0
syntax error
-> ERRR reading the deviceboot sector
xced Please select:
1: basi_sbol: iwrite
-> tring<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
2: basic_string<chaundefi, string_car_traits<char, _default_alloc_templte<rue, 0> >::at(unsigned int) const
3: string_char_traits<char>::lt(char const &, char const &)
Enter <number> to select, aything else to stop: c1800 (tRTC_SWinstalundefined sl): :/ymbol: dir
-> CMViews/ICP3300_undefined sy4.0_B2_CMView2/System/vxImage/xImgCommon/vxImgCommon_Sc/dosFsLib.c :media not formatted o not pre
Initiating transfer viandned symbol: tring
-> efremote FTP server to read UpgradeMain.out. Attempt 1 of 3
0xcc1800 (tRTC_SWinstall): D:/MViews/ICP3300_1undefined symbol: FTP.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgComon_Src/dosFsLib.c : ERROR readig the device boot sector
write() of0x the local file hacc1800srembol: reading
-> turned an (errortRTC_SWinstallError in reading : UpgradeMain.outD:/CMViews/ICP300_14.0_B2_CMView2/System/vxImages/vxImgCommon
file.
Fiined symbol: CMViews
-> le transfer failure.
Initiating transunder via remote FP
-> server toundefined symbol: read UpgradeMain.out. Attempt 2of 3
0xcc1800 (tRTC_SWinsall): D:/CMViews/ICP3300_1undefined symbol: .0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_1.0_B2_MView2/System/vxImges/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() efined symbol: an
-> of the loce
-> al file has returnd an errorError in readig UpgradeMain.out file.
File trnstoundefined
-> fer failure.
Initiating transfer viaundefined symboremote FundefiTP server to reundefine symbol: ld UpgraeMain.out. Attempt 3 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c media not formted or not presel: file
-> rined symbol: failure
-> te() of th ocal
-> local file has returundefined symbolvalue = 0 =ned an rrorError in reading UpradeMain.out file.
File transfer failure.
Initiating transfer viaundefined smremote FTP server to read upgrademain.out. Attempt of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading he device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages: te
-> /vxImgCo 0x0
syntax error
yntax error
-> mmon/vxImgCommon_rc/dosFsLib.c : media not formatted or not present
write() of th bol: fileundefine
-> local file ha returned an erroError n reading UpgradMain.out file.
File transfer failure.
Initiating transfer viaundefineremote FTP server to read upgrademain.out. Attempt2 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib-> .c : ERROR reading the device boot sector
invalid number: .c
->0xcc180 (tRTC_SWinstall: D:/CMViews/CP3300_14.0_B2_CMiew2/yd symbol: mmon
-> stem/vxImages/vxImgCommon/vxImgCommon_Src/osFsLib.c : media not formatted r not present
write() of th d symbol:undfile
-> local file has returned an errorError in eadig UpgradeMain.out file.
File transfer failure.
ERROR reading the deviunde boot sector
0cc1800 (tRTC_SWintall): D:/CMView/ICP3300_undefined symbol: reading
-> 14.0_B2_CMView2/Sy stem/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-undefined symbol: st write() of the local file has eturned an erroError inefined symbol: stem
-> reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> ERROR readinundefined symbol: the device boot sector0efined symbol: file
-> xcc1800 tRTC_SWinstall):/CMViews/ICP3300_undeined symbol: reading
-> 4.0_B2_CMView2/Systundefined symbol:em/vxImages/vxIgCommon/vxImgCommo_Src/dosFsLib.c: media not formatted or noem
-> t presentinvalid number: 14.0_
-> write() of the local"t" is overload file has returne an errorError in reading UpgradeMin.out file.
value = 0 = 0x0
syntaxerorUpgradeMain
->
-> -> RROR reading the device boot sector
syn0xcc1800 tRC_SWinstall)::/CMViews/IC3300_undefined sybol: reading
> 14.0_B2_CMView2/System/vxImages/vImgCommon/vxmgCommon_Sr/ xcc1800
-> dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-invalid n> write() of the local filehaed - Please select:
1: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
2: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int) const
3: string_char_traits<char>::lt(char const &, char const &)
Enter <number> to select, anything else to stop: undefined symbol: presentinvalid
-> s returned an errorError in reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> Initiating traundefined symbol:sfer via remote FTP servr to read upgrademain.out. Attempt 3 of 30xtax error
-> cc1800 (tRTC_SWnstall): D:/CMViws/ICP3300_1.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading
0xcc800 (tRTC_SWinstallundefi: D:/CMViews/ICP330014umber: .c
-> .0_B2_CMView2/System/vxImages/vxImCommon/vxImgComon_Src/dosFsLib.c : mdia not formatted or not present
inal an
-> iwrite() of the local file has returned an errorError in reading UpgradeMai.ut file.
Filetransfer failre.
ERundefined symOR fetching UpgradeMain.out from ftp server
d number: .0_
->
ned symbol: cc1800
->
partition 1 (/inactive/db) on controller 0 drive : errn = 16
0xcc1e80 (): task dadWarning: directory chaned via cd to /sysro
0xcc100 (tTC_SWinstall): D:/CMViewsICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c: 0
syntax error
-> ERRR reading the deviceboot sector
xced- Pleaseselect
bol: iwrite
-> 1: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
value 2: basic_string<char, string_chr_traits<char> __efault_alloc_templae<true, 0> >::at(unsigned int) const
3: string_char_traits<car>::lt(char const &, char const &)
Enter <number> to select, anthing else to stop: c1800 (tRTC_SWinstalundefined sl): :/ymbol: dir
-> CMViews/ICP3300_undefined sy4.0_B2_CMView2/System/vxImage/vImgCommon/vxImgCommon_Sc/dosFsLib.c : edia not formatted r not pre
Initiating transfer viand = 1 = 0x1
syntax error
-> efremote FTP server to read UpgradeMain.out. Attempt 1 of 3
0xcc1800 (tRTC_SWinstall): D:/MViews/ICP3300_1unde.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFLib.c : ERROR readig the device boot sector
write() of0x the local file hacc1800srembol: reading
-> turned an (errortRTC_SWinstallError in reading ): UpgradeMin.outD:/CMViews/ICP300_14.0_B2_CMView2/System/vxImages/vxImgCommon
file.
Fiined symbol: CMViews
-> le transfer failure.
Initiating transunder via remote FP fined symbol: FTP
-> server toundefined symbol: read UpgradeMain.out. Attempt 2of 3
0xcc1800 (tRTC_SWinsall): D:/CMViews/ICP3300_1undefined symbol: tou.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMVews/ICP3300_1.0_B2_CMView2/System/vxImges/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() efined symbl: an
-> of the locle
- al file has returned anerrorError in reading UpgradeMain.out file.
File trnsndefined
-> fer failure.
Initiating transfer viaundefined symboremote FundefinedTP server to reundefine symbol: ld UpgraeMain.out. Attempt 3 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c: media not formted or not presel: file
-> ri symbol: failure
-> te() of th ocal
local file has returvaunlue = 0 =ned n rrorError in reading UpradeMain.out file.
File transfer failure.
Initiating transfer viaundefined symremote FTP server o
MITEL SYSTEM ROM R3.1/17 Feb 5 2018
CCA Number : 56009216 RC.2
System Model : 00610001 F100
CPU Model : 8360 R80480021
Reset Config Low : 08030008
Reset Config High : b4500006
Coherent System Bus Clock (MHz) : 266
CPM Clock (MHz) : 266
Core Clock (MHz) : 399
DDR Clock (MHz) : 133
Local Bus Clock (MHz) : 66
Input Clock (MHz) : 33
Internal Memory Map : f0000000
Main Memory (MB) : 1024
Local Memory (MB) : 0
Flash Memory (MB) : 2
MAC Address : 08000f524b3c
L2 Switch : 1
POST Bypass : 0
Watchdog Bypass : 0
Slot Id : 0
Starting POST...
SDRAM CS1 Data Bit Walk 1................... PASSED
SDRAM CS1 Data Bit Walk 0................... PASSED
SDRAM CS2 Data Bit Walk 1................... PASSED
SDRAM CS2 Data Bit Walk 0................... PASSED
SDRAM CS1 Address Walk 1................... PASSED
SDRAM CS1 Address Walk 0................... PASSED
SDRAM CS2 Address Walk 1................... PASSED
SDRAM CS2 Address Walk 0................... PASSED
SDRAM CS1 March Test........................ PASSED
SDRAM CS2 March Test........................ PASSED
Starting vxWorks...
Reset Cause : 0x83 - POWER_ON_RESET
VxWorks System Boot
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Mitel Embedded PPC83XX F100
Version: VxWorks5.5.2
BSP version: 3.1/17
Creation date: Feb 5 2018, 14:36:28
Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7> <6>
[VxWorks Boot]: c
Unrecognized command. Type '?' for help.
[VxWorks Boot]: c
'.' = clear field; '-' = go to previous field; ^D = quit
boot device : qefcc0
processor number : 0
host name : bootHost
file name : Boot_Install
inet on ethernet (e) : 172.24.5.6:fffffc00
inet on backplane (b):
host inet (h) : 172.24.5.7
gateway inet (g) : 172.24.5.1
user (u) : MiVB8.0_SP3
ftp password (pw) (blank = use rsh): @
flags (f) : 0x0
target name (tn) :
startup script (s) :
other (o) : qefcc
[VxWorks Boot]: c
'.' = clear field; '-' = go to previous field; ^D = quit
boot device : qefcc0
processor number : 0
host name : bootHost
file name : Boot_Install
inet on ethernet (e) : 172.24.5.6:fffffc00
inet on backplane (b):
host inet (h) : 172.24.5.7
gateway inet (g) : 172.24.5.1
user (u) : MiVB8.0_SP3
ftp password (pw) (blank = use rsh): @
flags (f) : 0x0
target name (tn) :
startup script (s) :
other (o) : qefcc FixPartition
[VxWorks Boot]: @
boot device : qefcc
unit number : 0
processor number : 0
host name : bootHost
file name : Boot_Install
inet on ethernet (e) : 172.24.5.6:fffffc00
host inet (h) : 172.24.5.7
gateway inet (g) : 172.24.5.1
user (u) : MiVB8.0_SP3
ftp password (pw) : @
flags (f) : 0x0
other (o) : FixPartition
Attached TCP/IP interface to qefcc0.
Attaching network interface lo0... done.
Loading...
Error loading file: errno = 0x880212.
MITEL SYSTEM ROM R3.1/17 Feb 5 2018
CCA Number : 56009216 RC.2
System Model : 00610001 F100
CPU Model : 8360 R80480021
Reset Config Low : 08030008
Reset Config High : b4500006
Coherent System Bus Clock (MHz) : 266
CPM Clock (MHz) : 266
Core Clock (MHz) : 399
DDR Clock (MHz) : 133
Local Bus Clock (MHz) : 66
Input Clock (MHz) : 33
Internal Memory Map : f0000000
Main Memory (MB) : 1024
Local Memory (MB) : 0
Flash Memory (MB) : 2
MAC Address : 08000f524b3c
L2 Switch : 1
POST Bypass : 0
Watchdog Bypass : 0
Slot Id : 0
Starting POST...
SDRAM CS1 Data Bit Walk 1................... PASSED
SDRAM CS1 Data Bit Walk 0................... PASSED
SDRAM CS2 Data Bit Walk 1................... PASSED
SDRAM CS2 Data Bit Walk 0................... PASSED
SDRAM CS1 Address Walk 1................... PASSED
SDRAM CS1 Address Walk 0................... PASSED
SDRAM CS2 Address Walk 1................... PASSED
SDRAM CS2 Address Walk 0................... PASSED
Starting vxWorks...
Reset Cause : 0x103 - SOFTWARE_RESET
VxWorks System Boot
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Mitel Embedded PPC83XX F100
Version: VxWorks5.5.2
BSP version: 3.1/17
Creation date: Feb 5 2018, 14:36:28
Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7> <6>
[VxWorks Boot]: c
'.' = clear field; '-' = go to previous field; ^D = quit
boot device : qefcc0
processor number : 0
host name : bootHost
file name : Boot_Install
inet on ethernet (e) : 172.24.5.6:fffffc00
inet on backplane (b):
host inet (h) : 172.24.5.7
gateway inet (g) : 172.24.5.1
user (u) : MiVB8.0_SP3
ftp password (pw) (blank = use rsh): @
flags (f) : 0x0
target name (tn) :
startup script (s) :
other (o) : FixPartition motfcc
[VxWorks Boot]: @
boot device : qefcc
unit number : 0
processor number : 0
host name : bootHost
file name : Boot_Install
inet on ethernet (e) : 172.24.5.6:fffffc00
host inet (h) : 172.24.5.7
gateway inet (g) : 172.24.5.1
user (u) : MiVB8.0_SP3
ftp password (pw) : @
flags (f) : 0x0
other (o) : motfcc
Switching other device from motfcc to qefcc...
done
Attached TCP/IP interface to qefcc0.
Attaching network interface lo0... done.
Loading...
Error loading file: errno = 0x880212.
MITEL SYSTEM ROM R3.1/17 Feb 5 2018
CCA Number : 56009216 RC.2
System Model : 00610001 F100
CPU Model : 8360 R80480021
Reset Config Low : 08030008
Reset Config High : b4500006
Coherent System Bus Clock (MHz) : 266
CPM Clock (MHz) : 266
Core Clock (MHz) : 399
DDR Clock (MHz) : 133
Local Bus Clock (MHz) : 66
Input Clock (MHz) : 33
Internal Memory Map : f0000000
Main Memory (MB) : 1024
Local Memory (MB) : 0
Flash Memory (MB) : 2
MAC Address : 08000f524b3c
L2 Switch : 1
POST Bypass : 0
Watchdog Bypass : 0
Slot Id : 0
Starting POST...
SDRAM CS1 Data Bit Walk 1................... PASSED
SDRAM CS1 Data Bit Walk 0................... PASSED
SDRAM CS2 Data Bit Walk 1................... PASSED
SDRAM CS2 Data Bit Walk 0................... PASSED
SDRAM CS1 Address Walk 1................... PASSED
SDRAM CS1 Address Walk 0................... PASSED
SDRAM CS2 Address Walk 1................... PASSED
SDRAM CS2 Address Walk 0................... PASSED
Starting vxWorks...
Reset Cause : 0x103 - SOFTWARE_RESET
VxWorks System Boot
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Mitel Embedded PPC83XX F100
Version: VxWorks5.5.2
BSP version: 3.1/17
Creation date: Feb 5 2018, 14:36:28
Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6> <5>
[VxWorks Boot]: c
'.' = clear field; '-' = go to previous field; ^D = quit
boot device : qefcc0
processor number : 0
host name : bootHost
file name : Boot_Install
inet on ethernet (e) : 172.24.5.6:fffffc00
inet on backplane (b):
host inet (h) : 172.24.5.7
gateway inet (g) : 172.24.5.1
user (u) : MiVB8.0_SP3
ftp password (pw) (blank = use rsh): @
flags (f) : 0x0
target name (tn) :
startup script (s) :
other (o) : qefcc
[VxWorks Boot]: @
boot device : qefcc
unit number : 0
processor number : 0
host name : bootHost
file name : Boot_Install
inet on ethernet (e) : 172.24.5.6:fffffc00
host inet (h) : 172.24.5.7
gateway inet (g) : 172.24.5.1
user (u) : MiVB8.0_SP3
ftp password (pw) : @
flags (f) : 0x0
other (o) : qefcc
Attached TCP/IP interface to qefcc0.
Attaching network interface lo0... done.
Loading...
Error loading file: errno = 0x880212.
MITEL SYSTEM ROM R3.1/17 Feb 5 2018
CCA Number : 56009216 RC.2
System Model : 00610001 F100
CPU Model : 8360 R80480021
Reset Config Low : 08030008
Reset Config High : b4500006
Coherent System Bus Clock (MHz) : 266
CPM Clock (MHz) : 266
Core Clock (MHz) : 399
DDR Clock (MHz) : 133
Local Bus Clock (MHz) : 66
Input Clock (MHz) : 33
Internal Memory Map : f0000000
Main Memory (MB) : 1024
Local Memory (MB) : 0
Flash Memory (MB) : 2
MAC Address : 08000f524b3c
L2 Switch : 1
POST Bypass : 0
Watchdog Bypass : 0
Slot Id : 0
Starting POST...
SDRAM CS1 Data Bit Walk 1................... PASSED
SDRAM CS1 Data Bit Walk 0................... PASSED
SDRAM CS2 Data Bit Walk 1................... PASSED
SDRAM CS2 Data Bit Walk 0................... PASSED
SDRAM CS1 Address Walk 1................... PASSED
SDRAM CS1 Address Walk 0................... PASSED
SDRAM CS2 Address Walk 1................... PASSED
SDRAM CS2 Address Walk 0................... PASSED
Starting vxWorks...
Reset Cause : 0x103 - SOFTWARE_RESET
VxWorks System Boot
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Mitel Embedded PPC83XX F100
Version: VxWorks5.5.2
BSP version: 3.1/17
Creation date: Feb 5 2018, 14:36:28
Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6><5><4><3><2><1><0>
auto-booting...
boot device : qefcc
unit number : 0
processor number : 0
host name : bootHost
file name : Boot_Install
inet on ethernet (e) : 172.24.5.6:fffffc00
host inet (h) : 172.24.5.7
gateway inet (g) : 172.24.5.1
user (u) : MiVB8.0_SP3
ftp password (pw) : @
flags (f) : 0x0
other (o) : qefcc
Attached TCP/IP interface to qefcc0.
Attaching network interface lo0... done.
Loading... 10916176
Starting at 0x10000...
0x3f7ffe00 (tRootTask): Warning: directory changed via cd to /sysro
->
Last reset cause was (0x103) SOFTWARE_RESET
Creating block device for controller 0 drive 0... done.
Creating CBIO device for controller 0 drive 0... done.
ataGetDiskSize(0,0) = 76319MB
40G/80G drive partitioning scheme
Disk Configuration Started.
ctrl = 0, drive = 0 available disk space = 78150744KB
1677721KB added to /inactive/sysro partition
free disk space after partition 0 is 76473023KB
8598323KB added to /inactive/db partition
free disk space after partition 1 is 67874700KB
14680064KB added to /vmail partition
free disk space after partition 2 is 53194636KB
1677721KB added to /sysro partition
free disk space after partition 3 is 51516915KB
8598323KB added to /db partition
free disk space after partition 4 is 42918592KB
0KB added to /unused partition
free disk space after partition 5 is 42918592KB
disk space left after the first pass is 42918592KB
adding 42918592KB to /unused partition, (index 5)
Controller 0 drive 0 will be repartitioned according to these parameters:
partition 0 (/inactive/sysro)
-----------------------------
min_size = 1677721 K
max_size = 1677721 K
priority = 1
percent = 0%
format = TRUE
test = TRUE
label = TRUE
kbytes = 1677721 K
real percent = 2%
partition 1 (/inactive/db)
--------------------------
min_size = 8598323 K
max_size = 8598323 K
priority = 2
percent = 0%
format = TRUE
test = TRUE
label = TRUE
kbytes = 8598323 K
real percent = 11%
partition 2 (/vmail)
--------------------
min_size = 14680064 K
max_size = 14680064 K
priority = 3
percent = 0%
format = TRUE
test = TRUE
label = TRUE
kbytes = 14680064 K
real percent = 19%
partition 3 (/sysro)
--------------------
min_size = 1677721 K
max_size = 1677721 K
priority = 4
percent = 0%
format = TRUE
test = TRUE
label = TRUE
kbytes = 1677721 K
real percent = 2%
partition 4 (/db)
-----------------
min_size = 8598323 K
max_size = 8598323 K
priority = 5
percent = 0%
format = TRUE
test = TRUE
label = TRUE
kbytes = 8598323 K
real percent = 11%
partition 5 (/unused)
---------------------
min_size = 0 K
max_size = 0 K
priority = 6
percent = 0%
format = TRUE
test = TRUE
label = TRUE
kbytes = 42918592 K
real percent = 55%
Attaching to partition table for 6 partitions on controller 0 drive 0... done.
Creating Cache Layer for partition 0 (/inactive/sysro) on controller 0 drive 0... done.
Creating Cache Layer for partition 1 (/inactive/db) on controller 0 drive 0... done.
Creating Cache Layer for partition 2 (/vmail) on controller 0 drive 0... done.
Creating Cache Layer for partition 3 (/sysro) on controller 0 drive 0... done.
Creating Cache Layer for partition 4 (/db) on controller 0 drive 0... done.
Creating Cache Layer for partition 5 (/unused) on controller 0 drive 0... done.
Creating Dos FS device for partition 0 (/inactive/sysro) on controller 0 drive 0... done.
Creating Dos FS device for partition 1 (/inactive/db) on controller 0 drive 0... done.
Creating Dos FS device for partition 2 (/vmail) on controller 0 drive 0... done.
Creating Dos FS device for partition 3 (/sysro) on controller 0 drive 0... done.
Creating Dos FS device for partition 4 (/db) on controller 0 drive 0... done.
Creating Dos FS device for partition 5 (/unused) on controller 0 drive 0... done.
Formatting partition 0 (/inactive/sysro) on controller 0 drive 0... Retrieved old volume params with %95 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 0 clusters, 152639 sectors per FAT
Sectors reserved 32, hidden 0, FAT sectors 305278
Root dir entries 0, sysId (null) , serial number 69747261
Label:" " ...
Disk with 156301488 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 19499522 clusters, 152639 sectors per FAT
Sectors reserved 32, hidden 0, FAT sectors 305278
Root dir entries 0, sysId VX5DOS32, serial number 69747261
Label:" " ...
done.
Formatting partition 1 (/inactive/db) on controller 0 drive 0... Retrieved old volume params with %-1 confidence:
Volume Parameters: FAT type: FAT0, sectors per cluster 0
0 FAT copies, 0 clusters, 0 sectors per FAT
Sectors reserved 0, hidden 0, FAT sectors 0
Root dir entries 0, sysId (null) , serial number 0
Label:" " ...
Disk with 0 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 536870911 clusters, 0 sectors per FAT
Sectors reserved 1, hidden 0, FAT sectors 0
Root dir entries 0, sysId VXDOS12 , serial number 0
Label:" " ...
dosFsVolFormat: bad format parameters, errno = 0x16
ERROR: In usrAtaConfigExtended() failed to format partition 1 (/inactive/db) on controller 0 drive 0: errno = 16
0xcc1e80 (): task deadWarning: directory changed via cd to /sysro
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
Initiating transfer via remote FTP server to read UpgradeMain.out. Attempt 1 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
write() of0x the local file hacc1800s returned an (errortRTC_SWinstallError in reading ): UpgradeMain.outD:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
file.
File transfer failure.
Initiating transfer via remote FTP server to read UpgradeMain.out. Attempt 2 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() of the local file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
Initiating transfer via remote FTP server to read UpgradeMain.out. Attempt 3 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() of the local file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
Initiating transfer via remote FTP server to read upgrademain.out. Attempt 1 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() of the local file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
Initiating transfer via remote FTP server to read upgrademain.out. Attempt 2 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() of the local file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_undefined symbol: reading
-> 14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-> write() of the local file has returned an errorError in reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_undefined symbol: reading
-> 14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-> write() of the local file has returned an errorError in reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_undefined symbol: reading
-> 14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-> write() of the local file has returned an errorError in reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> Initiating transfer via remote FTP server to read upgrademain.out. Attempt 3 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() of the local file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
ERROR fetching UpgradeMain.out from ftp server
->
-> VxWorks System Boot
Copyright 1984-2002 Wind River Systems, Incundefined symbol: System
-> .
value = 0
->
->
->
->
->
-> CPU: Mitel Embedded PPC83XX F100
Version: VxWorks5.5.2
Bundefined symbol: CPU
-> SP version: 3.1/17
Creation date: Feb 5 2undefined symbol: SP
-> 018, 14:36:28
invalid number: 018
->
->
->
->
-> Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6><5><4><3><2><1><0undefined symbol: Press
-> >
can't create output ''
errno = 0xc0007
-> auto-booting...
boot device undefined symbol: auto
-> : qefcc
syntax error
-> unit number : 0
processor number : 0
host name "number" is overloaded - Please select:
: 1: List<Key *>::number(void) const
2: List<OutputterObj *>::number(void) const
3: List<Str *>::number(void) const
4: List<DStr *>::number(void) const
5: List<TokenItem *>::nbootHost
file name : Boot_Install
inet on ethernet (e) : 172.24..6:fffffc00
host inet () : 172.24..7
gateway inet (g) : 172.24.5.1
user (u) : MiVB8.0_P3
ftp passord (pw)
flags (f) : 0x0
other (o) : qfcc
Attached TCP/IP interface to qefcc0.
Attaching network iterface lo0... done.
Loading... 10916176taumber(void) const
6: List<FrontMatterItem *>::number(void) const
7: List<SortDef *>::number(void) const
8: List<VarBindingItem *>::number(void) const
9: List<RuleItem *>::number(void) const
10: List<PhrasePhrase *>::number(void) const
11: List<DataLineItem *>::number(void) const
12: List<QName *>::number(void) const
13: List<void *>::number(void) const
14: List<NamespaceStackObj *>::number(void) const
15: List<OutputHistoryItem *>::number(void) const
16: List<VarBindings *>::number(void) const
17: List<EQNameStr *>::number(void) const
18: List<ConvInfo *>::number(void) const
19: List<Vertex *>::number(void) const
20: List<EQName *>::number(void) const
21: List<StrStr *>::number(void) const
22: List<DecimalFormat *>::number(void) const
23: List<HashItem *>::number(void) const
24: List<int>::number(void) const
25: List<Expression *>::number(void) const
Enter <number> to select, anything else to stop: underting at 0x10000...
0x3fined symbol: number
-> f7ffe00 (tRootTask): Warning: directory changed via cd to /sysro
->
Last reset cause wasundefined symbol (0x13) SOFTWARE_RESET
Creating block device fo controller 0 drive 0... done.
Creating CIO device for controller 0 drive 0... done.
ataGetDiskSize(0,0) = 76319MB
40G/80G drive patitioning scheme
Disk Configuration Started
ctrl = 0, drive = 0 available disk space = 78150744KB
1677721KB added to /inactivesysro partition
free disk space after partition 0 is 76473023KB
8598323KBaded to /iac: f7ffe00
-> tive/db partition
free disk space after pundefinedartition 1 is 6787700B
14680064KB added to /vmail partition
free disk space afte partition 2 is 53194636KB
1677721KB added to /sysro parition
free disk space after partition 3 is 51516915KB
8598323KB added to /db partitio
free disk space after partition s 42918592KB
0KB added to /nused partition
free disk space after partition 5 is 42918592KB
disk space left after the first pas is 4291852K symbol: tive
-> B
adding 42918592KB to /uundenused partition, (inex 5)
Controller 0 drve 0 will be repartitioned according to these parameter:
partition 0 (/inactive/syso)
-----------------------------
min_size = 1677721 K
max_ize = 1677721 K
priority = 1
perent = 0%
format = TRUE
test = TRUE
label = TRUE
kbytes = 1677721 K
ral percent = 2%
fined symbol: B
-> partition 1 (/inactive/db)
---------------un-----------
in_size = 8598323 K
max_size = 8598323 K
priority = 2
percent = 0%
format = TRUE
test =TRUE
label = TRUE
kbtes = 8598323 K
real percent =11%
partition 2 (/vmil)
-------------------
min_size = 14680064 K
max_size = 14680064 K
priority = 3 percent = 0%
defined symbol: partition
-> format = TRUE
test = TRUE
"format" is label = TRUE
kbytes = 14680064 K
real pecent = 19%
partitin 3 (/sysro)
-------------------
min_size = 1677721 K
max_size = 167721 K
prioriy = 4
percent=0%
format = TRUE
test = TRUE
ael = TRUE
kbytes = 1677721 K
real percet = 2%
partition 4 (/b)
------ overloaded - Please select:
1: DecimalFormat::format(Situation &, Number &, Str const &, Str &)
2: DecimalFormatList::format(Situation &, EQName const &, Number &, Str const &, Str &)
Enter <number> to select, anything else to stop: undefined symbol: TRUE
-> ----------
syntax error
- min_size = 8598323 K
max_size =8598323 K
piority = 5
perent = 0%
fomat = TRUE
et = TRUE
label = TRE
kbytes = 859832 K
real percent =11%
partition 5 (/unused)
--------------------
min_size = 0 K
max_size = 0 K
priority = 6
percent = 0%
format = TRUE
test = TRUE
> label = TRUE
kbytes = 42918syntax error
-> 592 K
real percent = val55%
Ataching to patition table for 6 partitions n controller 0 drive 0... doe.
Creating Cache Laer for partition 0 (/inactive/sysro) on cntroller 0 drive 0.. done.
Creating Cah Layer for partition 1 (/iactive/db) on controller 0dive 0... done.
Creating Cache ayer for partition 2 (/vmail) on controller 0 drive ... done.
Creating Cach Layer for partition3 (/sysro) on controler 0 drive0.ue = 592 = 0x250
undefined symbol: K
-> .. done.
invalid Creating Cache Layer for partition 4 (/db on controller 0 drive 0... doe
Creating Cache Layer for partition 5 (/unused) on controller 0 drive 0... one.
Creating Dos FS device for partition 0 (/inactive/sysro) on controller 0 drive 0... done.
Creating Dos FS device for partition 1 (/inactive/db) on controller 0 rive 0... done.
Creating Dos FS device for partition 2 (/vmail) on controller 0 drive 0... done.
Creating Dos S number: ..
-> device for partition 3 (/sysro) on controller 0 drive 0... done.
Creating Dos FS device for partition 4 (/db) oundefi controller 0 drive 0... done.Creating Dos FS device for partition 5 (/unused) on controller 0 drive 0... done.
Formatting partition 0 (/inactive/sysro) on controller 0 drive 0... Retrieved old volum params with %95 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 0 clusters, 152639 sectors per FAT
Sectors reserved 32, hidden0, FAT sectrned symbol: for
-> s 305278
Root diTasr entries 0, sysId (null) , serial number69747261
Label:" " ...
Disk with 156301488 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 19499522 clusters, 152639 sectors per FAT
Sectors reserved 32, hidden 0, FAT sectors 305278
Root dir etries 0, sysId VX5DOS32, serial number 69747261
Label:" " ...
done.
Formattingpak not found
value = -1 = 0xffffffff
-> rtition 1 (/inactive/db) on controller 0 drive 0... Retrieved old volume params with %-1 confidence:
Volume Parameters: FAT uype: FAT0, ectors per cluster 0
0 FAT copies, 0 clusters, 0 sectors per FAT
Sectors reserved 0, hidden 0, FAT sectors 0
Root direntries 0, sysId (null) , serial number 0
Label:" " ...
Disk with 0 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT32, sectors pr cluster 8
2 FAT copies 53687911 clusters, 0 sectors er FAT
Sectors reserved 1, hiddn ndefined symbol: rtition
-> 0, FAT sectors 0
value = 0 = 0x Root dir entries 0, sysId VXDOS12 , serial number 0
Label:" " ...
dosFsVolForat: bad format parameters, errno = 0x16
ERROR:In usrAtaConfigExtended() failed to format partition 1 (/inactive/db) on controller 0 drive 0: errn = 16
0xcc1e80 (): task dadWarning: directory changed via cd to /sysro
0xcc1800 (tTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c: 0
syntax error
-> ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_undefined sy4.0_B2_CMView2/System/vxImage/vxImgCommon/vxImgCommon_Sc/dosFsLib.c : media not formatted or not present
Initiating transfer via remote FTP server to read UpgradeMain.out. Attempt 1 of 3
0xcc1800 (tRTC_SWinstall): D:/MViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
write() of0x the local file hacc1800srembol: reading
-> turned an (errortRTC_SWinstallError in reading ): UpgradeMain.outD:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon
file.
File transfer failure.
Initiating transunder via remote FTP server to read UpgradeMain.out. Attempt 2of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_1.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() efined symbol: an
-> of the local file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
Initiating transfer via remote FTP server to reundefined symbol: ld UpgraeMain.out. Attempt 3 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not presentwrite() of th ocal
-> local file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
Initiating transfer viaundefined symremote FTP server to read upgrademain.out. Attempt of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() of th bol: file
-> local file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
Initiating transfer viaundefineremote FTP server to read upgrademain.out. Attempt2 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() of th d symbol: file
-> local file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
ERROR reading the deviunde boot sector
0xcc1800 (tRTC_SWinstall): D:/CMView/ICP3300_undefined symbol: reading
-> 14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-> write() of the local file has returned an errorError in reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> ERROR reading the device boot sector0efined symbol: file
-> xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_undefined symbol: reading
-> 14.0_B2_CMView2/Systundefined symbol:em/vxImages/vxIgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not presentinvalid number: 14.0_
-> write() of the local file has returned an errorError in reading UpgradeMain.out file.
value = 0 = 0x0
syntaxerror
-> ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_undefined sybol: reading
> 14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Sr/ xcc1800
-> dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-invalid n> write() of the local file has returned an errorError in reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> Initiating transfer via remote FTP server to read upgrademain.out. Attempt 3 of 3
0xcc1800 (tRTC_SWnstall): D:/CMViws/ICP3300_1.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc800 (tRTC_SWinstall): D:/CMViews/ICP330014umber: .c
-> .0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
invaliwrite() of the local file has returned an errorError in reading UpgradeMai.out file.
File transfer failre.
ERROR fetching UpgradeMain.out from ftp server
d number: .0_
-> max_size = 0 K
priority = 6
"max_size" is overloaded - Please select:
1: list<MiBufferPoolIF *, allocator<MiBufferPoolIF *> >::max_size(void) const
2: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::max_size(void) const
Enter <number> to select, anything else to stop: percent = 0%
new symbol "max_size" added to symbol table.
formmax_size = 0x3cd83d88: value = 0 = 0x0at = TRUE
undefined symbol: K
-> test = TRUE
> label = TRUE
undefined symbol: TRUE
->
-> kbytes = 42918syntax error
-> 592 K
real pinvalid number: 42918s
-> ercent = val55%
Ataching to patition table for 6 partitions nundefined symbol: val55
-> controller 0 drive 0... doe.
Creating Cache Laer forundefined symbol: controller
-> partition 0 (/inactive/sysro) on cntroller 0 drive 0.. done.
Creating Cah Layer for undefpartition 1 (iactive/db) on controller 0dive 0... done.
Creating Cah ayer for partition (/vmail) on controller0 drive ... done.
Creating Cach Layer for parttion (/sysro) on controler 0 drive0.ue = 52 = 0x250undefined symbol: K
-> .. done.
invald Creating Cache Lae for partition 4 (/db on controller 0 drive 0... doe
Creating Cache Layer for partition 5 (/unused) oncontroller 0 drive 0...onined symbol: partition
-> e.
No breakpoints
vreating Dos FS device for partition 0 (/inactive/sysro) on controller 0 drive 0... done.
Creating Dos FS device for partition 1 (/iactive/db) on controller 0 rive 0... done.
Creating Dos FS device for partition 2 (/vmail) on controller 0 drive 0... done.
Creating Dos S number: ..
-> device for partitio 3 (/sysro) n controller 0 drive 0... done.
Creating Dos FS device for partition 4 (/db) oundefi controller 0 drive 0...doalue = 0 = 0x0
-> ne.Creating Dos FS device for partition 5 (/unused) on controller 0 drive 0... done.
Formatting partition 0 invalid num/inactive/sysro) on controller 0 drive ... Retrieved old volum params with %95 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 8
2 FAT copies, 0 clusters, 152639 sectors per FAT
Secors reserved 32, hidden0, AT sectrned symbol: for
-> s 305278
Root diTasr entries 0, sysId (null) , serial number69747261
Label:" " ...
Disk with 156301488 sectors of 512bytes wlber: .C
-> l be formatted with:
Volume Parameters: FAT type: FAT32, sectors peundefined s cluster 8
2 FAT copies, 19499522 clusters, 152639 sectors per FAT
Sectors reserved 32, hidden 0, FAT sectors 305278
Root dir etries 0, sysId VX5DOS32, serial number 6947261
Label:" " ...
done.
Formattingpaknot found
value = -1 = 0xffffffff
-> rtition 1 (/inactive/db) on cotroller 0 drive 0... Retrieved old volume params with %-1 confience:
Volume Paraetymbol: formatted
-> ers: FAT uype: FAT0, ectors per cluster 0
0 FAT copies, 0 clusters, 0 sectors per FAT
Sectors reserved 0, hidden 0, FAT sectos 0
Root direntries 0, sysId (null) , serial number 0
Label:" " ...
Disk with 0 sectors of 512 btes will be formatted with:
Volume Parameters: FAT type: FA32, sectors pr cluster 8
2 FAT opies 53687911 clusters, 0 sectors er FAT
Secors reserved 1, hiddn ndefined symbol: rtition
-> 0, FAT sectors 0
value = 0 = 0x ooundefined symbol: ers
-> t dir entries 0, sysId VXDOS12 , serial number 0
Label:" " ."t" is overload..
dosFsVolForat: bad forma parameters, errno = 0x16
ERROR:In usrAtaConfgExtended() failed to format partition 1 (/inactive/db) on controller 0 drive : errn = 16
0xcc1e80 (): task dadWarning: directory chaned via cd to /sysro
0xcc1800 (tTC_SWinstall): D:/CMViewsICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c: 0
syntax error
-> ERRR reading the deviceboot sector
xced - Please select:
1: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
2: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int) const
3: string_char_traits<char>::lt(char const &, char const &)
Enter <number> to select, anything else to stop: c1800 (tRTC_SWinstalundefined sl): :/ymbol: dir
-> CMViews/ICP3300_undefined sy4.0_B2_CMView2/System/vxImage/vxImgCommon/vxImgCommon_Sc/dosFsLib.c : media not formatted or not pre
Initiating transfer viaundefremote FTP server to read UpgradeMain.out. Attempt 1 of 3
0xcc1800 (tRTC_SWinstall): D:/MViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR readig the device boot sector
write() of0x the local file hacc1800srembol: reading
-> turned an (errortRTC_SWinstallError in reading ): UpgradeMain.outD:/CMViews/ICP300_14.0_B2_CMView2/System/vxImages/vxImgCommon
file.
Fiined symbol: CMViews
-> le transfer failure.
Initiating transunder via remote FTP server toundefined symbol: read UpgradeMain.out. Attempt 2of 3
0xcc1800 (tRTC_SWinsall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_1.0_B2_CMView2/System/vxImges/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() efined symbol: an
-> of the locle
-> al file has returned an errorError in reading UpgradeMain.out file.
File transfer failure.
Initiating transfer viaundefined symboremote FTP server to reundefine symbol: ld UpgraeMain.out. Attempt 3 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formated or not presel: file
-> write() of th ocal
-> local file has returvalue = 0 =ned an rrorError in reading UpradeMain.out file.
File transfer failure.
Initiating transfer viaundefined symremote FTP server to read upgrademain.out. Attempt of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading he device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCo 0x0
syntax error
-> mmon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() of th bol: fileundefine
-> local file has returned an erroError in reading UpgradMain.out file.
File transfer failure.
Initiating transfer viaundefineremote FTP server to read upgrademain.out. Attempt2 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMiew2/yd symbol: mmon
-> stem/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() of th d symbol:undfile
-> local file has returned an errorError in eading UpgradeMain.out file.
File transfer failure.
ERROR reading the deviunde boot sector
0xcc1800 (tRTC_SWintall): D:/CMView/ICP3300_undefined symbol: reading
-> 14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-> write() of the local file has returned an erroError inefined symbol: stem
-> reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> ERROR readingundefined symbol: the device boot sector0efined symbol: file
-> xcc1800 (tRTC_SWinstall)
:/CMViews/ICP3300_undeined symbol: reading-> 14.0_B2_CMView2/Systundefined symbol:em/vxImages/vxIgCommon/vxImgCommon_Src/dosFsLib.c: media not formatted or not presentinvalid number: 14.0_
-> write() of the local file has returned an errorError in reading UpgradeMin.out file.
value = 0 = 0x0
syntaxerorUpgradeMain
->
-> -> ERROR reading the device boot sector
syn0xcc1800 tRTC_SWinstall)
:/CMViews/IC3300_undefined sybol: reading> 14.0_B2_CMView2/System/vxImages/vxImgCommon/vxmgCommon_Sr/ xcc1800
-> dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-invalid n> write() of the local file has returned an errorError in reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> Initiating transfer via remote FTP server to read upgrademain.out. Attempt 3 of 30xtax error
-> cc1800 (tRTC_SWnstall): D:/CMViws/ICP3300_1.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading
0xcc800 (tRTC_SWinstallundefi: D:/CMViews/ICP330014umber: .c
-> .0_B2_CMView2/System/vxImages/vxImgCommon/vxImgComon_Src/dosFsLib.c : mdia not formatted or not present
invaliwrite() of the local file has returned an errorError in reading UpgradeMai.ut file.
Filetransfer failre.
ERROR fetching UpgradeMain.out from ftp server
d number: .0_
->
ned symbol: cc1800
-> partition 1 (/inactive/db) on controller 0 drive : errn = 16
0xcc1e80 (): task dadWaundefined symbol: partition
-> rning: directory chaned via cd to /sysro
0xcc1800 (tTC_SWinstallundefined symbol: rning
-> ): D:/CMViewsICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c: 0
syntax error
-> syntax error
-> ERRR reading the devundefined symbol: syntax
-> iceboot sector
xced - Please select:
1: basic_string<charundefined symbol: sector
-> , string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
syntax error
-> 2: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int) const
value = 2 = 0x2 3: st
syntax error
-> ring_char_traits<char>::lt(char const &, char const &)
Enter <number> to selecundefined symbol: ring_char_traits
-> t, anything else to stop: c1800 (tRTC_SWinstalundefined sl): :/ymbol: dir
-> CMViews/ICP3300_unde"t" is overloaded - Please select:
1: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
2: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int) const
f 3: string_char_traits<char>::ned sy4.0_B2_CMView2/System/vxImage/vxImgCommon/vxImgCommon_Sc/dosFLib.c : media not formatted or not pre
Initiating transferviaundefremote FTP server to read UpgradeMain.out. Attempt 1 of 3
0xcc1800 (tRTC_SWinstall): D:/MViews/ICP3300_14.0_B2_CMView2/System/vImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR readig the device boot sector
write() of0x the local file hacc1800srembol: reading
-> urlt(char const &, char const &)
Enter <number> to select, anything else to stop: undefined symbol: t
-> ned an (errortRTC_SWinstallError in reading ): UpgradeMain.outD:/CMViews/ICP300_14.0_B2_CMView2/System/vxImages/vxImgCommon
file.
Fiined symbol: CMViews
-> le transfer fundefined symbol: ailure.
Iitiating transunder via remote FTP server toundefined symbol: read UpgradeMain.out. Attempt 2of 3
0xcc1800 (tRTC_SWinsall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device bot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_1.0_B2_CMView/System/vxImges/vxImgCommon/vxImgCommon_Src/dosFsLib.c : medin
-> a not formatted or not present
write() efined symbol: an
-> of the locle
-> aundefined symbo file has returned an errorError in readin UpgradeMain.out file.
File transfer failure.
Initiating transfer viaundefined symboremote FTP server to reundefine symbol: ld UpgraeMain.out. Attempt 3 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstal)l: not
-> : D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formated or not presel:
syntax e-> write() of th ocal
-> local file has returvlue = 0 =ned an rrorError in reading UpradeMain.out file.
File transfer failure.
Initiating transfer viaundefined symremote FTP server o read upgrademain.out. Attempt of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading he device boot sctor
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_rror
-> CMView2/System/vxImages/vxImgCo 0x0
syntax error
-> mmon/vxundefined symImgCommon_Src/dosFsLib.c : edia not formatted or not present
write() of th bol: fileundefine
-> local file ha returned an erroError in reading UpgradMain.out file.
File transfer failure.
Initiating transfer viaundefineremoteFTP server to read upgrademain.out. Attempt2 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR radbol: CMView2
-> ing the device boot sector
0xcc1800 (tRTC_SWinstal"ing"l)
:/CMViews/IC3300_14.0_B2_CMiew2/yd symbol: mmon-> stem/vxImages/vxImgCommon/vxImgCommon_Src/dossLib.c : media not formatted or not present
write() of th d symbol:undfile
-> local file has returned a errorError in eading UgradeMain.out file.
File transfer failure.
ERROR reading the deviunde boot sector
0xcc1800 (tRTC_SWintall): D:/CMView/ICP3300_undefined symbol: reading
-> 14.0_B2_CMView2Sy is overloaded - Please select:
1: CDSRemoteDispatcher:
ing(void)2: CDSProxyIDSRemoteDispatcherSkel:
ing(void)Enter <number> to select, anything else to stop: undefined symbol: the
-> stem/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-undefine write() of the local file has returned anerroError inefined symbl: stem
-> reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> ERROR readingundefined symbol: the evice boot sector0efined symbol: file
-> xcc1800 (tRC_SWinstall)
:/CMViews/ICP3300_undeined symbol: reading-> 14.0_B2_CMView2/Systundefined ymbol:em/vxImages/vxIgCommon/vxImgCommon_Src/dosFsLib.c: media not formtted or nod symbol: stem
-> t presentinvalid number: 14.0_
-> write() of the local"t" file hs returned an errorErrr in reading UpgradeMin.out file.
value = 0 = 0x0
syntaxerorUpgradeMain
->
-> -> RROR reading the device boot sector
syn0xcc1800 tRC_SWinstall)::/CMViews/IC3300_undefined sybol: reading
> 14.0_B2_CMView2/System/vxImages/vImgCommon/vxmgCommon_Sr/ xcc1800
-> dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-invalid n> write() of the local filehais overloaded - Please select:
1: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
2: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int) const
3: string_char_traits<char>::lt(char const &, char const &)
Enter <number> to select, anything else to stop: s returned an errorEundefined symbol: prror in reading UpgradeMain.out file.
value = 0 = x0
syntax errr
resentinvalid
-> -> Initiating transfer via remote FTP server to read upgrademain.out. Attempt 3 of 30xtax error
synt-> cc1800 (tRTC_SWnstall): D:/CMViws/ICP3300_1.0_B2_CMView2/SystemvxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading
0xcc800 (tRTC_SWinstallundefi: D:/CMViews/ICP330014umber: .c
-> .0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCmon_Src/dosFsLib.c : mdia not formatted or not present
invaliwrite() of the local file has returned an errorError in reading UpgradeMai.ut fie.
Filetranser failre.
ERRR fetching Upgraax error
-> deMain.out from ftp server
d number: .0_
->
ned syinvalid numbol: cc180
->
mber: .o
-> partition 1 (/inactive/db) on controller 0 drive : errn = 16
0xcc1e80 (): task dadWaundefined symbol: partition
-> rning: directory chaned via cd to /sysro
0xcc1800 (tTC_SWinstallundefined symbol: rning
-> ): D:/CMViewsICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c: 0
syntax error
-> syntax error
-> ERRR reading the devundefined symbol: syntax
-> iceboot sector
xced - Please select:
1: basic_string<charundefined symbol: sector
-> , string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
syntax error
-> 2: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int) const
value = 2 = 0x2 3: st
syntax error
-> ring_char_traits<char>::lt(char const &, char const &)
Enter <number> to selecundefined symbol: ring_char_traits
-> t, anything else to stop: c1800 (tRTC_SWinstalundefined sl): :/ymbol: dir
-> CMViews/ICP3300_unde"t" is overloaded - Please select:
1: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
2: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int) const
f 3: string_char_traits<char>::ned sy4.0_B2_CMView2/System/vxImage/vxImgCommon/vxImgCommon_Sc/dosFLib.c : media not formatted or not pre
Initiating transferviaundefremote FTP server to read UpgradeMain.out. Attempt 1 of 3
0xcc1800 (tRTC_SWinstall): D:/MViews/ICP3300_14.0_B2_CMView2/System/vImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR readig the device boot sector
write() of0x the local file hacc1800srembol: reading
-> urlt(char const &, char const &)
Enter <number> to select, anything else to stop: undefined symbol: t
-> ned an (errortRTC_SWinstallError in reading ): UpgradeMain.outD:/CMViews/ICP300_14.0_B2_CMView2/System/vxImages/vxImgCommon
file.
Fiined symbol: CMViews
-> le transfer fundefined symbol: ailure.
Iitiating transunder via remote FTP server toundefined symbol: read UpgradeMain.out. Attempt 2of 3
0xcc1800 (tRTC_SWinsall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device bot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_1.0_B2_CMView/System/vxImges/vxImgCommon/vxImgCommon_Src/dosFsLib.c : medin
-> a not formatted or not present
write() efined symbol: an
-> of the locle
-> aundefined symbo file has returned an errorError in readin UpgradeMain.out file.
File transfer failure.
Initiating transfer viaundefined symboremote FTP server to reundefine symbol: ld UpgraeMain.out. Attempt 3 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstal)l: not
-> : D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formated or not presel:
syntax e-> write() of th ocal
-> local file has returvlue = 0 =ned an rrorError in reading UpradeMain.out file.
File transfer failure.
Initiating transfer viaundefined symremote FTP server o read upgrademain.out. Attempt of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading he device boot sctor
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_rror
-> CMView2/System/vxImages/vxImgCo 0x0
syntax error
-> mmon/vxundefined symImgCommon_Src/dosFsLib.c : edia not formatted or not present
write() of th bol: fileundefine
-> local file ha returned an erroError in reading UpgradMain.out file.
File transfer failure.
Initiating transfer viaundefineremoteFTP server to read upgrademain.out. Attempt2 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR radbol: CMView2
-> ing the device boot sector
0xcc1800 (tRTC_SWinstal"ing"l)
:/CMViews/IC3300_14.0_B2_CMiew2/yd symbol: mmon-> stem/vxImages/vxImgCommon/vxImgCommon_Src/dossLib.c : media not formatted or not present
write() of th d symbol:undfile
-> local file has returned a errorError in eading UgradeMain.out file.
File transfer failure.
ERROR reading the deviunde boot sector
0xcc1800 (tRTC_SWintall): D:/CMView/ICP3300_undefined symbol: reading
-> 14.0_B2_CMView2Sy is overloaded - Please select:
1: CDSRemoteDispatcher:
ing(void)2: CDSProxyIDSRemoteDispatcherSkel:
ing(void)Enter <number> to select, anything else to stop: undefined symbol: the
-> stem/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-undefine write() of the local file has returned anerroError inefined symbl: stem
-> reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> ERROR readingundefined symbol: the evice boot sector0efined symbol: file
-> xcc1800 (tRC_SWinstall)
:/CMViews/ICP3300_undeined symbol: reading-> 14.0_B2_CMView2/Systundefined ymbol:em/vxImages/vxIgCommon/vxImgCommon_Src/dosFsLib.c: media not formtted or nod symbol: stem
-> t presentinvalid number: 14.0_
-> write() of the local"t" file hs returned an errorErrr in reading UpgradeMin.out file.
value = 0 = 0x0
syntaxerorUpgradeMain
->
-> -> RROR reading the device boot sector
syn0xcc1800 tRC_SWinstall)::/CMViews/IC3300_undefined sybol: reading
> 14.0_B2_CMView2/System/vxImages/vImgCommon/vxmgCommon_Sr/ xcc1800
-> dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-invalid n> write() of the local filehais overloaded - Please select:
1: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
2: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int) const
3: string_char_traits<char>::lt(char const &, char const &)
Enter <number> to select, anything else to stop: undefined symbol: presentinvalid
-> s returned an errorError in reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> Initiating traundefsfer via remote FTP server to read ugrademain.out. Attempt 3 of 30xtax error
-> cc1800 (tRTC_SWnstall): D:/CMViws/ICP3300_1.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading
0xcc800 (tRTC_SWinstallundefi: D:/CMViews/ICP330014umber: .c
-> .0_B2_CMView2/System/vxImages/vxImgCommon/vxImComon_Src/dosFsLib.c : mdia not formatted or not present
inalined symbol: an
-> iwrite() of the local file has returned an errorError in reading UpgradeMai.ut file.
ailre.
ERROR fetching Upundefined symgradeMain.out from ftp server
d number: .0_
->
ned symbol: cc1800
->
partition 1 (/inactive/db) on controller 0 drive : errn = 16
0xcc1e80 (): task dadWarning: directory chaned via cd to /sysro
0xcc180 (tTC_SWinstall): D:/CMViewsICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c: 0
syntax error
-> ERRR reading the deviceboot sector
xced Please select:
1: basi_sbol: iwrite
-> tring<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
2: basic_string<chaundefi, string_car_traits<char, _default_alloc_templte<rue, 0> >::at(unsigned int) const
3: string_char_traits<char>::lt(char const &, char const &)
Enter <number> to select, aything else to stop: c1800 (tRTC_SWinstalundefined sl): :/ymbol: dir
-> CMViews/ICP3300_undefined sy4.0_B2_CMView2/System/vxImage/xImgCommon/vxImgCommon_Sc/dosFsLib.c :media not formatted o not pre
Initiating transfer viandned symbol: tring
-> efremote FTP server to read UpgradeMain.out. Attempt 1 of 3
0xcc1800 (tRTC_SWinstall): D:/MViews/ICP3300_1undefined symbol: FTP.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgComon_Src/dosFsLib.c : ERROR readig the device boot sector
write() of0x the local file hacc1800srembol: reading
-> turned an (errortRTC_SWinstallError in reading : UpgradeMain.outD:/CMViews/ICP300_14.0_B2_CMView2/System/vxImages/vxImgCommon
file.
Fiined symbol: CMViews
-> le transfer failure.
Initiating transunder via remote FP
-> server toundefined symbol: read UpgradeMain.out. Attempt 2of 3
0xcc1800 (tRTC_SWinsall): D:/CMViews/ICP3300_1undefined symbol: .0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_1.0_B2_MView2/System/vxImges/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() efined symbol: an
-> of the loce
-> al file has returnd an errorError in readig UpgradeMain.out file.
File trnstoundefined
-> fer failure.
Initiating transfer viaundefined symboremote FundefiTP server to reundefine symbol: ld UpgraeMain.out. Attempt 3 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c media not formted or not presel: file
-> rined symbol: failure
-> te() of th ocal
-> local file has returundefined symbolvalue = 0 =ned an rrorError in reading UpradeMain.out file.
File transfer failure.
Initiating transfer viaundefined smremote FTP server to read upgrademain.out. Attempt of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading he device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages: te
-> /vxImgCo 0x0
syntax error
yntax error
-> mmon/vxImgCommon_rc/dosFsLib.c : media not formatted or not present
write() of th bol: fileundefine
-> local file ha returned an erroError n reading UpgradMain.out file.
File transfer failure.
Initiating transfer viaundefineremote FTP server to read upgrademain.out. Attempt2 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib-> .c : ERROR reading the device boot sector
invalid number: .c
->0xcc180 (tRTC_SWinstall: D:/CMViews/CP3300_14.0_B2_CMiew2/yd symbol: mmon
-> stem/vxImages/vxImgCommon/vxImgCommon_Src/osFsLib.c : media not formatted r not present
write() of th d symbol:undfile
-> local file has returned an errorError in eadig UpgradeMain.out file.
File transfer failure.
ERROR reading the deviunde boot sector
0cc1800 (tRTC_SWintall): D:/CMView/ICP3300_undefined symbol: reading
-> 14.0_B2_CMView2/Sy stem/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-undefined symbol: st write() of the local file has eturned an erroError inefined symbol: stem
-> reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> ERROR readinundefined symbol: the device boot sector0efined symbol: file
-> xcc1800 tRTC_SWinstall)
:/CMViews/ICP3300_undeined symbol: reading-> 4.0_B2_CMView2/Systundefined symbol:em/vxImages/vxIgCommon/vxImgCommo_Src/dosFsLib.c: media not formatted or noem
-> t presentinvalid number: 14.0_
-> write() of the local"t" is overload file has returne an errorError in reading UpgradeMin.out file.
value = 0 = 0x0
syntaxerorUpgradeMain
->
-> -> RROR reading the device boot sector
syn0xcc1800 tRC_SWinstall)::/CMViews/IC3300_undefined sybol: reading
> 14.0_B2_CMView2/System/vxImages/vImgCommon/vxmgCommon_Sr/ xcc1800
-> dosFsLib.c : media not formatted or not present
invalid number: 14.0_
-invalid n> write() of the local filehaed - Please select:
1: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
2: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int) const
3: string_char_traits<char>::lt(char const &, char const &)
Enter <number> to select, anything else to stop: undefined symbol: presentinvalid
-> s returned an errorError in reading UpgradeMain.out file.
value = 0 = 0x0
syntax error
-> Initiating traundefined symbol:sfer via remote FTP servr to read upgrademain.out. Attempt 3 of 30xtax error
-> cc1800 (tRTC_SWnstall): D:/CMViws/ICP3300_1.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading
0xcc800 (tRTC_SWinstallundefi: D:/CMViews/ICP330014umber: .c
-> .0_B2_CMView2/System/vxImages/vxImCommon/vxImgComon_Src/dosFsLib.c : mdia not formatted or not present
inal an
-> iwrite() of the local file has returned an errorError in reading UpgradeMai.ut file.
Filetransfer failre.
ERundefined symOR fetching UpgradeMain.out from ftp server
d number: .0_
->
ned symbol: cc1800
->
partition 1 (/inactive/db) on controller 0 drive : errn = 16
0xcc1e80 (): task dadWarning: directory chaned via cd to /sysro
0xcc100 (tTC_SWinstall): D:/CMViewsICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c: 0
syntax error
-> ERRR reading the deviceboot sector
xced- Pleaseselect
bol: iwrite
-> 1: basic_string<char, string_char_traits<char>, __default_alloc_template<true, 0> >::at(unsigned int)
value 2: basic_string<char, string_chr_traits<char> __efault_alloc_templae<true, 0> >::at(unsigned int) const
3: string_char_traits<car>::lt(char const &, char const &)
Enter <number> to select, anthing else to stop: c1800 (tRTC_SWinstalundefined sl): :/ymbol: dir
-> CMViews/ICP3300_undefined sy4.0_B2_CMView2/System/vxImage/vImgCommon/vxImgCommon_Sc/dosFsLib.c : edia not formatted r not pre
Initiating transfer viand = 1 = 0x1
syntax error
-> efremote FTP server to read UpgradeMain.out. Attempt 1 of 3
0xcc1800 (tRTC_SWinstall): D:/MViews/ICP3300_1unde.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFLib.c : ERROR readig the device boot sector
write() of0x the local file hacc1800srembol: reading
-> turned an (errortRTC_SWinstallError in reading ): UpgradeMin.outD:/CMViews/ICP300_14.0_B2_CMView2/System/vxImages/vxImgCommon
file.
Fiined symbol: CMViews
-> le transfer failure.
Initiating transunder via remote FP fined symbol: FTP
-> server toundefined symbol: read UpgradeMain.out. Attempt 2of 3
0xcc1800 (tRTC_SWinsall): D:/CMViews/ICP3300_1undefined symbol: tou.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMVews/ICP3300_1.0_B2_CMView2/System/vxImges/vxImgCommon/vxImgCommon_Src/dosFsLib.c : media not formatted or not present
write() efined symbl: an
-> of the locle
- al file has returned anerrorError in reading UpgradeMain.out file.
File trnsndefined
-> fer failure.
Initiating transfer viaundefined symboremote FundefinedTP server to reundefine symbol: ld UpgraeMain.out. Attempt 3 of 3
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c : ERROR reading the device boot sector
0xcc1800 (tRTC_SWinstall): D:/CMViews/ICP3300_14.0_B2_CMView2/System/vxImages/vxImgCommon/vxImgCommon_Src/dosFsLib.c: media not formted or not presel: file
-> ri symbol: failure
-> te() of th ocal
local file has returvaunlue = 0 =ned n rrorError in reading UpradeMain.out file.
File transfer failure.
Initiating transfer viaundefined symremote FTP server o