hyper terminal and smdr with a 200 CX Controller

[mrdelite29]

Have an emergency situation where a client wants some smdr numbers to present in a meeting. What I would like to do is capture the smdr in hyper terminal as I do with a 3300 user port 1752.

Is this possible with a 200 ICP? And can you explain how to set it up please? Meanwhile I am still searching the forums.

 

[nytalkin]

telnet to the ip of the ICP port 61328 make sure smdr is set to go to printer port. do a file capture of the telnet session the smdr records will appear as if by magic.

NO GOOD DEED GOES UNPUNISHED!

 

[kwbMitel]

Form 34 would be used to direct SMDR to the printer port.

Form 16 needs to be toggled to turn SMDR on for the trunk group.

Form 3 needs the SMDR options turned on for the stations and trunks (In the 700's and 800's)

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.