Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Huntgroup FME to an external number 1

Status
Not open for further replies.

Alpha008

Technical User
Sep 17, 2008
53
GB
I have tried to create an ADN for a huntgroup follow me but it is not working( I get 'failed' when i press the key) i.e A22A67160B1075B . 1075 is an abbreviated dial for the external number . The class of Service for the phone is ok . When i try this on the switchboard , it works fine but not on the handset . Any ideas / suggestions.

”Beginning is half done.”
 
Sorry forgot to mention it's a MX ONE TSW SP6

”Beginning is half done.”
 
Hi,

operator can indeed divert huntgroups.
if D6 of the SERV parameter of the GH is set to 2, GH members can also divert the GH externally (so in you case the ADN must be member of the GH)

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Hello, using ACD grp instead GH supervisor & OPI are able to divert the group, or CDINI to ADCOI.
 
Thanks all for your input , i managed to sort this out by changing the last SEL digit to 2(for ECF i.e external follow me allowed). The phone(doing the divert) also has to be a member of the Hunt .

Many thanks

”Beginning is half done.”
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top