Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Huntgroup enable from external

Status
Not open for further replies.

bazlit

MIS
May 4, 2004
111
AU
we have some users setup with extensions that forward to mobiles and have huntgroup forwarding set as well, but is there a way from the mobile to enable/disable presence in the huntgroup for the virtual exntension that forwards to them?
 
Only if you Have VM Pro

the PlayConfigurationMenu Action will do what you require
 
i have had a look at the play configuration option but cannot figure out how to set it up for enable/disbale a user in a huntgroup, can you explain further please?

Barry
 
set up a short code so you can dial it from outside. Set a unique shortcode for each user who needs this feature.
 
but with huntgroup enable/disable it doesnt let you specify which extension to enable/disbale, only which huntgroup and assumes the extension you are dialing from or is there another option
 
looking further I do not think you can enable or disable the user from the group

The play configuration menu option will alow the user to put his phone on DND or change his forwarding options.
 
i guess that could work in a way though, if they turned forwarding off and the virtual extension was in DND then that would in effect make them not recieve calls for the huntgroup?
 
correct that would stop the usere recieving group calls
it is not an ideal solution but could bet an acceptable work around
 
thanks Ipguru for sterring me in the right direction, i will give the solution a go and see how it goes
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top