Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hunt group announcement won't play

Status
Not open for further replies.

dnuf

Vendor
Aug 26, 2006
24
US
I'm having trouble with my Hunt Group announcement not playing. The recording is verified by dialing *91 200 1 hunt group 200 announcement #1. Calls are handled by the AA and when the caller selects 2 to be routed to an agent they should get the hunt group queue annoucement when all phones in the group are busy. The caller gets the AA annoucement again. When I dial 200 directly my HG annoucement does play.

Help
 
Did the post at the premise in a hurry. Let me add that this post is about IP500 v.2 using the v6 firmware.

Embedded small voice mail

6 analog co lines
3 phones in a single hunt group
no other phones.
 
Check the sysmonitor or SSA to see if it goes to the right HG. Is the ICR directly going to the HG?

Avaya_Red.gif

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________
 
Thanks for the input, I will have to get back to the customer location and verify as you suggested.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top