Hi,
Out IBM tape drive started failing, so we got a HP Surestore DAT24EU. We configured the switches as per HP's
documentation, shut down the rs6000, connected the tape drive and started the rs6000 and we cannot write to the drive. We get "Device not ready". The SCSI ID is the same as the last drive.
Any ideas?
Tony
Out IBM tape drive started failing, so we got a HP Surestore DAT24EU. We configured the switches as per HP's
documentation, shut down the rs6000, connected the tape drive and started the rs6000 and we cannot write to the drive. We get "Device not ready". The SCSI ID is the same as the last drive.
Any ideas?
Tony