Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to Stop Analog Set Dialing

Status
Not open for further replies.

tomlinsonm

IS-IT--Management
Aug 11, 2011
28
US
Hey guys!
can you help? I have a security line (Analog set) going to a gate. They have to update info regularly. The problem is there is a fault on the cable somewhere (I have a contractor looking for it) and the set keeps dialing out 4 digit extensions - the other day it dialed 911. Is there a way to TOTALLY disallow this set to dial anything?
I looked at all the CLS restrictions but nothing totally blocks dialing! (They dial IN to a device at the gate so it never has to dial out.


Thanks much!
 
So you probably have 911 programmed in LD 24 and even fully-restricted phones can dial 911.
Best solution I can think of is to make it a hotline to itself.
CLS ehta
FTR hot d 4 xxxx ==> it's own 4 digit extension
 
Good idea StanleySteamer!

I can do just that -
Thank you!
MT
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top