Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to split IP Authenticated Sip trunk?

Status
Not open for further replies.

cruzades

Programmer
Sep 6, 2011
254
PH
Here is the scenario:

I have this 45 DID from one VOIP Provider:

Given: ITSP Domain Name
DID's: 45
Authentication: IP

I have Line#20 and inputted all the 30 DID's on this line. All DIDs are now working.

With the remaining DIDs (15 of them), I have created Line#21, mirrored the SIP Line setting from Line#20 and inputted the remaining 15 DIDs, oddly inbound is not working on these 15 DIDs.

Am I missing some config on how these 15 DIDs will be virtually included on the Line#20 though it is on Line#21?

Isolation so far:
I removed the first 15 DIDs on Line#20 and put back the 15DID's from Line#21, then, everything works perfectly.

Any thought?

Thanks.
 
Se the inbond line id for both SIP trunks to the same number and use the outbound line id to split into sections.
The only thing is, why would you do this as all calls will be accounted on the same trunk or per ddi number which can be set per user.

A simple mind delivers great solutions
 
@intrigrant
Se the inbond line id for both SIP trunks to the same number and use the outbound line id to split into sections.

I already did this one, still no luck, still inbound is not working when they split into 2 SIP Lines with same inbound group #.
 
Why two lines?
You can put as many DDI in a trunk as you like.
You say you have IP authentication but i think you also use a username and password per DDI, i am i right?


BAZINGA!

I'm not insane, my mother had me tested!

 
You can put as many DDI in a trunk as you like.

Oh, I can't find a way to add more than 30 DID's in one Trunk, am I missing something here :(

You say you have IP authentication but i think you also use a username and password per DDI, i am i right?

Online username but no password, IP address is used for authentication.
 
You just need to add all the SIP URI's or use "use internal data" for the first settings and * for the other two.
Enter the DDI (SIP URI's) on the users and groups and you are done.


BAZINGA!

I'm not insane, my mother had me tested!

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top