Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to send the name in p-asserted identity in the invite to SIP phone
- Thread starter mohdvr
- Start date
- Thread starter
- #3
- Thread starter
- #5
- Thread starter
- #6
I was connecting Avaya SIP phones with CUCM I raised ticket with Cisco when Cisco phones calling to Avaya only number is shown and not the name
Cisco TAC told that Avaya need to have the name in p-asserted identity during the invite to the phone
Cisco TAC told that Avaya need to have the name in p-asserted identity during the invite to the phone
- Thread starter
- #8
CUCM knows the phone's name. So make CUCM send the name in the p asserted identity.
The phone is a phone. It has a phone number, not a name. You shouldn't care if your Avaya phone sends a name or not in PAI. CUCM will handle that phone's calls and if CUCM is, for example, routing a call to the pstn from that Avaya phone, CUCM needs to ensure the name is in PAI going out.
Anyway, you can't set that in 46xxsettings - that's a general config file that applies to many phones.
The phone is a phone. It has a phone number, not a name. You shouldn't care if your Avaya phone sends a name or not in PAI. CUCM will handle that phone's calls and if CUCM is, for example, routing a call to the pstn from that Avaya phone, CUCM needs to ensure the name is in PAI going out.
Anyway, you can't set that in 46xxsettings - that's a general config file that applies to many phones.
- Status
Similar threads
- Locked
- Question
- Question