Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to recover NS300 "LED Blinking" issue.

Status
Not open for further replies.

Yanlin Aung

Systems Engineer
Oct 25, 2023
8
SG
[highlight #EDD400]Hello Dears,

We got a lot of issue about NS300.

Most of the issue are the NS300 main card "LED Blinking" issue.

Let me know any suggestion for that issue.

Can we make the firmware upgrade while happen like that?

Thank you.[/highlight]
 
What is "LED Blinking" named?
There are several of them.
What color is LED?
 
Yes , if don't power off , the flashing will be all the time.

I hear that on some topic , there will have recovery file and it needed 4 files. Is that right?

Can i know that files name and it can be copy from another ns300?

or

What you would like to suggest?

Thank you.
 
In your case, NAND is corrupted.
You need 4 recovery files that you mentioned.
NS300 are not available in our region, so I can't help you.
 
Hello Mike,

That is fine , if ns300 not available in your region but can you mention the file names and it can be copy from other workable ns300?

If you region is available for like ns500/ns700 then you can check it right?

Thanks again for your suggestion.
 
These 4 files are developed by the manufacturer specifically for each model. These files are not inside the PBX. You have to create special SD Card which has the special 4 files in it. You have to connect the created special SD Card (with USB-SD Card adaptor) to the unit, and have to start the unit with initializing position. By those operations, the broken system files of NAND-Flash memory would be recovered by the data of the created special SD Card.
 
Hi Mike,

Do you have any contact to got these files or technician to support service for my issue?

If any one have a solution can make contact with me WhatsApp +959450059551.

Thank you.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top