how to mask numbar when making outgoing calls 1

[mlpress]

Hello
I was wondering what changes I would have to make on this setup to mask the number when a user is dailing out.. This is so none of our clients is able to determine where the call is coming from. Thanks for any feedback on this



REQ PRT
TYPE: tn
TYPE TNB
TN 6 14
DATE
PAGE
DES

DES 3820
TN 006 0 00 14
TYPE 2616
CDEN 8D
CUST 0
AOM 0
FDN 5555
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 0
SCI 0
SSU 0000
LNRS 16
XLST
SCPW
SFLT NO
CAC 0
CLS UNR FBD WTA LPR MTD FNA HTA ADD HFA
MWA AAD IMD XHA IRD NID OLD VCE DRG1
POD DSX VMD CCSD SWD LNA CNDA
CFTA SFA MRD DDV CNIA CDCA
ICDD CDMD MCTD CLBD AUTU
GPUD DPUA DNDD CFXA ARHD FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID
UDI RCC HBTD AHA DDGA NAMA MIND PRSD NRWD NRCD NROD
EXR0
USRD ULAD RTDD OCBD FLXD FTTC
CPND_LANG ENG
RCO 0
EFD 5555
HUNT 000
EHT 5555
LHK 2
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 6530 1 MARP
CPND
NAME XXXXX
XPLN 27
DISPLAY_FMT FIRST,LAST
01
02 SCR 530 1 MARP
CPND
NAME GUEST
XPLN 27
DISPLAY_FMT FIRST,LAST
03 TRN
04 AO6
05 CFW 16
06 MWK 5555
07
08 ADL 16
09 ADL 16
10 ADL 16
11 ADL 16
12 ADL 16
13 ADL 16
14 ADL 16
15
DATE 9 NOV 2005

 

[mlpress]

OK sorry I realise this is a CLID question. However I don't know how to assign a specific DN to a CLID entry that would block to outgoing display as not all phones need to have their ID blocked just two. Once again thanks to all for any inpu on this in advance
Kind Regards
mlpress

 

[johnpoole]

ddgd in cls will do that, for a clid entry to show,

key 0 scr xxxx 4 with 4 as the clid table

john poole
bellsouth business
columbia,sc

 

[HASAGO]

From memory if you change the CLI table from entry 1 to D (has to be for both keys) for deny this should block the CLI from being sent out.
Try and test. Hope this helps?

KEY 00 SCR 6530 D MARP
CPND
NAME XXXXX
XPLN 27
DISPLAY_FMT FIRST,LAST
01
02 SCR 530 D MARP
CPND
NAME GUEST
XPLN 27
DISPLAY_FMT FIRST,LAST

 

[johnpoole]

didn't think d could be used that way, i use it for line 1 thru whatever to show the did clid of key 0.. mostly used when key 0 is did but others are not.. might blank out the clid if used on key 0..ddgd doesn't even show dn on internal, same on external... changed some phone in the lab that way so doc's couldn't call the techs for rush.. the needed to call the acd dn.. then i found out that those phones couldn't call some ld numbers because they had the no display blocked..

john poole
bellsouth business
columbia,sc

 

[HASAGO]

You might be right John, havn't tested but you may not be able to assign all keys with D - you might have to have at least 1 key assigned with a CLI table?
The other option is to create a new CLI table with no details in the table as per below. The assign the table to the keys on that phone.

ENTRY 1
HNTN
HLCL
DIDN NO
HLOC
LSC
CLASS_FMT DN

KEY 00 SCR 6530 1 MARP
CPND
NAME XXXXX
XPLN 27
DISPLAY_FMT FIRST,LAST
01
02 SCR 530 1 MARP
CPND
NAME GUEST
XPLN 27
DISPLAY_FMT FIRST,LAST

 

[mlpress]

Hello
Thanks very much John and Hasago. I will try this today. Sorry I didn't reply sooner. What is strange is that I got one of the phones block the caller ID but only half the time. It seems that when they call certain numbers the iD iis blocked however with others it shows up. Not sure why this is. Anyway I'll try the changes you both mentioned and let you know how it goes.
Once again thanks for your time and help
Kind Regards
Mark

 

[Dphone]

I use the "D" for all the line 1 thru whatever to show the DN of key "0". So that if someone calls 911 from any of the other extensions besides key "0" on the phone. 911 thinks it came from the "0" key.

key 0 scr 1234
key 1 scr 2345 D
key 2 scr 5678 D
key 3 scn 6789 D
etc.

 

[mlpress]

Hello Dan
Lets say I have 2 CLID entries 1 and 2.
To assign a specific entry to a key on a phone I would
do a key 0 scr 1 for CLID entry 1?
Thanks for your input
Mark

 

[mlpress]

Hello Again
Sorry all, I think I'm getting the hang of this. Just want to know one last thing. To create a new CLID entry just for testing purposes is that in LD 15? and if so what are the first two commands
Req: New
type : ?
Thanks to all for help
Mark

 

[johnpoole]

this might help

ld 21
prt
clid

ld 15
chg
net

john poole
bellsouth business
columbia,sc