How to identify the number of channels in a trunk?

[summerdike]

I manage a network of Hipath's/Hicom's using a Hipath-manager and Hipath-AM management server.
In AM trunks are identified with a location code followed by a 2 to 4 digit number. For example: "Loc6. 167".

Where and how can I find the number of channels (2, 15, 30? 60?) in this trunk ("Loc6. 167")?

______________________________
Fictitious Destination Table containing Fictitious Route Choices....

 

[summerdike]

Can anyone tell me how to identify the number of B channels in a trunk group in a Hicom/Hipath PBX?
Please state the commands to use in Comwin!


______________________________
Fictitious Destination Table containing Fictitious Route Choices....

 

[Bas1234]

B channels look like.

7801,7802,7803...ect....and up, those can be dialed from any extension.

for SMDR it will Show 01,02,03,......ect.

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[tars]

dis-sdsu:all,,pen,per3,x,x,x,x;

x=the pen ie 1,2,25,0

That will show you the trunk and each circuit status.

dis-buend;

That will show you trunk groups configured on the swu.

dis-buend:1;

Will show you the circuits attached to each trunk group.