Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

how to confirm QoS on ERS 5520?

Status
Not open for further replies.

eksantrik

Technical User
Dec 13, 2005
74
US
Hi all,

I configured QoS on a Nortel 5520 stack. Now I need to know that the voice packets are hitting the right queue in my queue set. Is there a command in CLI of ERS5520 that shows the packet volume for each queue?

If not, is there any other way to confirm the QoS configuration?

Thanks in advance
 
This is silly from a cisco point of view (which you might have since you want queue counters), but classifiers manually created will tag pings, so fire up wireshark and ping a phone device, if it's dscp tag is not stripped, there you go!
 
I actually need something like that..a queue pacet counter under switch'es CLI.


something like "show queue statistics"

i could not find anything like that so far
 
Hi Eksantrik,

Doesn't the show qos statistics <policy number> give you the information you want ?
You should see the Total In-Profile Packets increase while traffic goes through the switch.
Regards,

yaoul
 
unfortunately what i am looking for is a little more than that.

I already checked all the command but non of them gives me how many packets hit each queue in a queue set.

I was hoping maybe there is a hidden command that I dont know or miss,

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top