how to confirm QoS on ERS 5520?

[eksantrik]

Hi all,

I configured QoS on a Nortel 5520 stack. Now I need to know that the voice packets are hitting the right queue in my queue set. Is there a command in CLI of ERS5520 that shows the packet volume for each queue?

If not, is there any other way to confirm the QoS configuration?

Thanks in advance

 

[CharlesBr]

This is silly from a cisco point of view (which you might have since you want queue counters), but classifiers manually created will tag pings, so fire up wireshark and ping a phone device, if it's dscp tag is not stripped, there you go!

 

[eksantrik]

I actually need something like that..a queue pacet counter under switch'es CLI.


something like "show queue statistics"

i could not find anything like that so far

 

[Yaoul]

Hi Eksantrik,

Doesn't the show qos statistics <policy number> give you the information you want ?
You should see the Total In-Profile Packets increase while traffic goes through the switch.
Regards,

yaoul

 

[eksantrik]

unfortunately what i am looking for is a little more than that.

I already checked all the command but non of them gives me how many packets hit each queue in a queue set.

I was hoping maybe there is a hidden command that I dont know or miss,

Thanks