How to change FTR HOT D

[Skullet]

Hello,

Can anyone tell me how to change the FTR HOT D for an analog phone? I need to change the ext. it is directed to, and I'm not having any luck.

Thanks.

 

[KCFLHRC]

It would be under feature HOT D 4 XXXX if your DN's are 4 digits

 

[Skullet]

Thanks for the quick response. I'm having an issue when I get to the FTR in ld 20. When it asks for "item" I have tried typing in FTR, FTR HOT D, FTR HOT D 77, but I'm still not doing something right. The ext. that I'm trying to forward to is only two digits, 77. After I type in 77 and press enter, it just shows FTR (see below). I'm not sure how to proceed.

LD 20
REQ: CHG
TYPE: 500
TN 60 1 10 13
ECHG YES
ITEM FTR HOT D 77
FTR

 

[KCFLHRC]

Read my original post ftr hot d s is the DN length and then your DN

so ftr hot d 2 77

 

[Skullet]

I was in the wrong load, below is what worked for me. Thanks for your help!

LD 10
REQ: CHG
TYPE: 500
TN 60 1 10 13
ECHG YES
ITEM FTR HOT D 2 77
FTR
ITEM