I have been trying to set up a "lab" in our switch room using left over norstar parts. I have a Mics and a flash mail. My intercomm on the sets has a 3 digit ic number and the mail will only accept 2 digit mailboxes is there a way to change the vmail to 3 digits or is it a software thing? Any help would be appriciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to change dn length on flash mail 2
- Thread starter clarke123
- Start date
-
1
- #2
You have to reinstall the VM ,By this way you will erase everything and start from scratch.To do so after log in F983 and enter you admin mail box and the password.when you see Mbox AA, others then you will press 1 and you will see Pswd dial (REINSTALL),and press OK and itv will say reset database press YES,It will default and you will be able to reconfigure it again with your system as 3 digits.
Good Luck.
Good Luck.
-
1
- #3
curlycord
Programmer
You need to reintstall vmail programming as it sounds like it still has the last companies programming.
Log into F983 then 120000 or 121234 then once your in press 1, password= (reinstall)724678255, this will wipe out programming. Once it exits then login using 266344 as password and config the system to your liking, it will read the 3 digits off the KSU automaticly.
Log into F983 then 120000 or 121234 then once your in press 1, password= (reinstall)724678255, this will wipe out programming. Once it exits then login using 266344 as password and config the system to your liking, it will read the 3 digits off the KSU automaticly.
- Thread starter
- #4
curlycord
Programmer
Ok its a newer flash so press Feature 903 and press ok and ok when it asks for key codes then do the F983.
curlycord
Programmer
You too fast for my old bones samh30 lol
- Thread starter
- #8
curlycord
Programmer
No problem....next time we will have 3 of us lol
- Thread starter
- #10
When it asked for pswd .You enter CONFIG(266344).It will let you config. the VM and follow the sequence.after the VM been configured it will ask for log then you will enter 1020000.
Good Luck.
Good Luck.
- Thread starter
- #12
- Status
