Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to assign LD20 a user/pwd for a new user in rel 4.0 and rel4.5

Status
Not open for further replies.

20080727

Technical User
Jul 27, 2008
12
HK
We have PABX with version of rel4.0 and rel4.5 and is planning to assign a user access right for a user to use LD20 only. Can you help to show us the steps on how to create it in LD17?

 
u need the 2nd level password to build new logins. without it, you're toast.

once you get it, do a search on here for LAPW or on one of the NTP's. the acronym stands for Limited Access Password.
 
You also want to assign LD 22 as you will not be able to do a DNB without it.

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.
 
You will have to assign 10,11, and 32 to properly use 20, unless you want that person to only use the print in 20. Otherwise it is linked to the other loads that you will have to allow access to.

JohnThePhoneGuy

"If I can't fix it, it's not broke!
 
Thanks tnphoneman, I get the 2nd pwd and can add new user with Ld20.

Johnthephoneguy, can the user access LD10, 11 and 32 if I only assign him LD20?

 
no, Load 20 by itself is just a print load. They linked the others to it in later releases but you still have to give them access when building a login.

JohnThePhoneGuy

"If I can't fix it, it's not broke!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top