How do I Remotely Reboot Mitel 3300 Controller

[lkrull]

Could someone please give me the command to reboot a Mitel 3300 Controller.

At times we would lose connection and would have to manually power the Mitel Controller down then back on to bring it up.
I have access to the Controller remotely and it would save me time to do it from home instead of coming out to manually reboot the Controller.
I dont want to schedule a weekly or monthly reboot...just want to know how to reboot it on the spot.

 

[YnotPhone]

command line:
RESET SYSTEM

 

[YnotPhone]

I guess I should have added...
In the case of the MXe Server, this command does not reset the controller, it just restarts the call server. To reset the MXe Server, you must log in to the server manager and reboot the APC.

 

[lkrull]

Thanx YnotPhone,

Can you tell me how to reset the MXe Server to reboot the APC

 

[mitelmitel]

Log into MSL and on the left hand side click on shutdown or reconfigure, select reboot, and perform.

 

[chode79]

In the main commands enter: load 1
This reboots the controller

 

[nytalkin]

Noooooo. Issue command RESET CALLSERVER.

NO GOOD DEED GOES UNPUNISHED!

 

[bobcheese]

Load 1 is not good. This is qualifies as an unexpected reset and if nothing else will take longer to reboot. However you run the risk of killing the disk etc.