I have a G3siV6. I programmed COR 2 with an FRL 2. The Calling Party Resriction is set at all-toll. I want users to be able to dial local-toll area codes like: 310, 323, 562, & 818 & 626. However, they're not able to dial out at all. I've tested and it's acting like an "outward" restriction. They can't even dial the NPA (213) or 800#'s. I have checked the route-patterns and they are:
Grp. FRL NPA Pfx
2 2 213 1
11 4 1
213 2 1
I looked at the ars ana and 1562 was not there, only 1500. Do I have to program it in the ars? If so, do I program it as a fnpa or a hnpa?
I appreciate your help on this.
PCTelecom
Grp. FRL NPA Pfx
2 2 213 1
11 4 1
213 2 1
I looked at the ars ana and 1562 was not there, only 1500. Do I have to program it in the ars? If so, do I program it as a fnpa or a hnpa?
I appreciate your help on this.
PCTelecom