How do I place a call across several Switches?

[tiaka]

I can place a call from G3SI_1 thru EPN to 8700 using tac code across a tie line

How do I place a call from G3SI_Main that maintains the UDP/DID ranges for both switches connected by a DS1/ISDN Trunk to G3SI_1 to EPN to 8700
[hope the attachment is with this ]

 

[jarett56]

You can use your UDP table to send a number to the aar analysis table. The aar analysis table can then send to a route pattern. The route pattern will then have your ISDN trunk listed in the route pattern.

In the route pattern you can also add or delete the digits needed for the far end switch.