How can I check available licenses for IP Softphone on CM? 1

[surferdude949]

I'm testing to get IP Softphone r.6 on Windows 7 and want to check first if my switch has enough IP Softphone licenses.

How do I check in ASA the number of available IP Softphone licenses?

I'm running S8500 CM5, IP Softphone 5.2 SP4, thank you.

 

[DAVIDPAYNE]

display capacity, look at page 11.

 

[98Converter]

We had some audio issues on W7 and IPS R6.

You should upgrade to One-X Communicator... I don't believe Avaya is supporting R6 Softphone on W7.

Thanks,
98C

We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.

 

[surferdude949]

I did a disp capacity and lookted at page 11. The number of available IP station is what I should be looking at?


"You should upgrade to One-X Communicator... I don't believe Avaya is supporting R6 Softphone on W7. "

I found an Avaya IP Softphone matrix but nothing shows about compability with Win 7. Any documents out there with an updated matrix?

 

[DAVIDPAYNE]

That will tell you how many concurrent LIC you have for each type of softphone.

 

[98Converter]

Didn't read the first post closely enough, but with CM5.2, you're entitled to as many Softphone RTU that you have station RTU, along with One-X Communicator...

display capacity

Station Capacity: 3690 140 3830
IP_Soft 5 : 11 3819 3830 :
oneX_Comm : 1 17999 18000 :


Thanks,
98C

We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.

 

[DAVIDPAYNE]

I didn't notice the version ether, and 98Converter is correct.