Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How Branch Office 1000B works?

Status
Not open for further replies.

Beauty1982

Programmer
May 29, 2008
144
MX

Hi folks:

I have a CS1K Rls 5.0 in a main site and in a remote site there's a Branch office Rls. 5.0, but this is the first time I work on a site like this and have the next doubts.

( I have tried to find and NTP with the information I required, but none with an easy explanation)

* How does it work?
* The 1000B has the main site call server database? or it's a different database.

Thanks in advance for your help

Friendly regards



 
Two PBX's, two different databases.
The IP sets redirect from the 1000b to the MO.

The 1000b is mainly used for fallback for the IP sets.
It can also support local analog and TDM devices, DTI/PRI.

NTP 553-3001-214
 
The only way you would only have to administer one database is if you had a SMG (Survivable Media Gateway).
 

Thanks a lot mjclothier, Your explanation and the NTP provided are very valuable for me.
 
Like I learned in the Marines
If you want more information, look in the publication.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top