High Speed Workstations

[Irwin]

I have a client that just picked up a 1.6GHZ workstation with 512MB of Ram. They get an error #43 on this one workstation when they reach a bit of code defining a browse window. This does not happen on a workstation running at 1GHZ with 512MB of ram.

Any Thoughts would help.

 

[rgbean]

What version of FoxPro? (e.g. FPD 2.5b, FPW 2.6a) Exactly what code is being used to define the browse window? Do you have a MEMLIMIT set in your CONFIG.FP(W) file? (If yes, what values are you using?)

Rick

 

[Irwin]

The client is running fpw2.6a and the memlimit is at 85,2048,4096. They have also previously installed the patch26 from microsoft.

 

[rgbean]

I use:
MEMLIMIT = 60, 2048, 16384
Since #43 is "There is not enough memory to complete this operation.", this is at least worth a try. Note: I've found specifying more than 16MB (like above) to cause more problems than it fixes.

SAVE SCREEN and BROWSE ... SAVE can 'eat' a lot of memory especially if you are running on higher resolutions with greater color depths.

Rick