Hidding / Filtering Subprojects in 2010

[0sprey]

I have a Project 2010 Master project that contains two (2) Subprojects.

What is the best method to hide the Subprojects from both the Gantt and Task Sheet view of the Master project ?

I have tried at some Custom filtering however cannot find a method to filter the out.

KMD
Canada

 

[JulieInMaine]

I'm not following why a filter doesn't work. Drop in a Flag field and set the Flag on the tasks you wish to show to "yes". Then filter for only "yes". An autofilter should work just fine.

 

[0sprey]

Thanks for this this Julie...
I add the flag field (and set to YES for all Tasks in the MasgterProject) and filter as you describe.
I was thinking that there may be a field already in the standard configuration of either the MasterProject or the SubProject, already existing, that I could filter on.... but perhaps that is not the case.
KMSD

 

[JulieInMaine]

There is a subproject File field but it only shows data for the inserted summary line. Filtering on that would still leave the subtasks. I think the Flag field is easier to use.

 

[thimerse26]

Great, I thinking a lot of time about this issue...