Hicom 300 E PBX Time Change 3

[Soulece]

Hi,

So I took over the control of our HICOM 300 E PBX system, however, I cannot find any manuals or information on how to configure the time on the PBX. The PBX is running an hour behind and I am trying to correct it, however, I can't seem to find where in LC-WIN I can change the time. I've read that you can't change the time using the phone on the 300 E like you can on other PBXs and that LC-WIN was the way to do it but there weren't any instructions on how to fix the time in LC-WIN. Any help would be much appreciated.

 

[sbcsu]

Log on
CHANGE-DATE <ENTER>
Follow prompts

 

[Soulece]

I used putty to get into the PBX but it has defined menus and doesn't give me a command line. It asks what terminal type I want to use, is there a specific terminal type I need to pick to use the command?

Edit: The terminal type that is default is 'Pansi'

 

[masviss]

Try the VT100 terminal.

 

[Soulece]

These are the only available terminals on our box.

 

[sbcsu]

Download and install Comwin from the FAQ and log on that way.
faq965-7883

 

[bigrsmith]

Yeah, LC-WIN is supposed to be the go-to for this stuff, but it's not always a walk in the park to find what you need. Did you dive into the settings menus in LC-WIN yet?