Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HiCom 150 H

Status
Not open for further replies.

WendiC

MIS
Aug 11, 2004
20
US
Hello

We have a HiCom 150 H that was formerly in an office of ours that has been closed down. We are considering using that equip in another office, howevee we know pretty much nothing about this system - other locations all have avaya definity.

Need to know if HiCom 150 H has ACD capabilites and other fancy bells and whistles that we are accustomed to from the avaya definity series? (and if anyone out there still supports it?)

Any insight would be greatly appreciated!
Thank you
Wendi
 
The 150H is still a fairly current switch, and although its not supported by siemens (dependant on hardware revision) it's still supported by lots of resellers.

The HiCom has some ACD functionality, although not as comprehensive as what you'd be used to with a definity.

Aftermarket equipment such as Swan Solutions Callview can connect to the HiCom and give increased functionality.
 
Thank you very much.

Would you happen to know of a site or directory where I can find reliable resellers to help install or further guide me in making a decision on whether to go with this switch?

Thanks again for your response

 
My office and the switch - NJ
the office we want to install is in San Francisco, CA
 
Ah, may be a little problem there, the only switch maintainers of reputable stature I know would be about 6000 miles away, here in the U.K.

Sorry!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top