Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hi Path 4k Configuration of memory 1

Status
Not open for further replies.

cowboy72

MIS
Apr 4, 2012
23
US
Howdy all,

In assistant, under Config management > show all Him data > Config of memory > Key System. Is there a way thru AMO to change the number allocated for how many key system phones that can be configured? It seems i have reached the number allocated and the system won't allow me to create another phone as a key system , when the system max is much higher. Thank you for your help!
 
You will have to change the memory partition partner, dont think this is something you want to tackle unless your familiar on what to change since there is a potential to crash the switch
 
dis-dimsu; will display your memory partitions
add-dimsu:user press enter until you get to keysys

test-dimsu if you want to be sure you have memory available.
I use test-dimsu for large partitions changes
 
Thank you for your post, this was very helpful. I was able to change the number allocated for the 'key system'.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top