Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help with Redundancy

Status
Not open for further replies.
Nov 24, 2009
57
US
I have a store that had a network problem on Aloha. The cable for BOH was accidentally unplugged from the network switch.

Aloha went down and the store manager put system into redundancy mode and called me. I rushed over, troubleshooted the situation and reattached the cable. Ran file system recovery and all was well. Store has been running fine for the last week and a half. Now today the FOH terminals are warning that system can only be in redundancy for 6 more days.

I verified that the system is not in redundancy mode. BOH has all of the reports for each day including current day. FOH terminals do not show the red redundancy border during order taking. It appears that everything is running fine, except the warning when logging into FOH terminals.

Something appears to still be flagged, but I can not find it. Any suggestions before the redundancy reaches 15 days?
 
Couple of things that you may want to check...

1. Make sure Lanacfg is set to 0 on the NIC.
2. Verify the Aloha/POS User has Admin rights to access the registry on FOH terms. The BOH is functioning because it sees the Hasp but the FOH doesn't.
 
check on both of those. Front of the house is not in Redundancy Mode. everything is writing to the Translog in the BOH data folder and everything on BOH is current to front of the house.
 

tried again to run Fileserver Recovery. It appeared to not do anything so I looked in Debout.svr on Back of House. Can see where I ran the Fileserver Recovery, but found this entry

Jun 03, 22:16:00, [6856], [INFO],,"BOH requesting recovery from fileserver down but denied because CtlSvr is in NON ROBUST mode"

Can someone explain NON ROBUST mode and how to fix this?

 
In the enviromental variables, robust-true. I also confirmed this by running set in a command window and it displays robust=true
however, in the debout.svt it says bRobust=false

Here is the debout.svr from last reboot
Jun 04, 11:55:04, [2336], [STATUS],,"............................................................"
Jun 04, 11:55:04, [2336], [STATUS],,"CTLSVR: Started CtlServiceThread... version 6.7.20.2468 "
Jun 04, 11:55:04, [2336], [INFO],,"CTLSVR 6.7.20.2468 is running on workstation ALOHABOH"
Jun 04, 11:55:04, [2336], [INFO],,"CTLSVR: IBERDIR is C:\BOOTDRV\ALOHA"
Jun 04, 11:55:04, [2332], [INFO],,"[Run] SpawnRadiantHeartBeatCheckerThread... "
Jun 04, 11:55:04, [2336], [INFO],,"Operating system is Windows 7 (BuildNumber 7601, Platform 2, Version 6.1, Service Pack 1)"
Jun 04, 11:55:04, [2336], [INFO],,"Hasp driver for Windows NT has not been installed."
Jun 04, 11:55:05, [2336], [INFO],,"Security: Parsing SEC codes from ini file: C:\BOOTDRV\ALOHA\data\Aloha.ini"
Jun 04, 11:55:05, [2336], [INFO],,"Security: Ini key serial: 1790439015"
Jun 04, 11:55:05, [2336], [INFO],,"Security: Ini key number: 68083"
Jun 04, 11:55:05, [2336], [INFO],,"Security: Loading hasp key information from local machine"
Jun 04, 11:55:06, [2336], [INFO],,"Security: Hasp key serial: 1790439015"
Jun 04, 11:55:06, [2336], [INFO],,"Security: Hasp key number: 68083"
Jun 04, 11:55:06, [2336], [INFO],,"Security: Unable to read redundancy information"
Jun 04, 11:55:06, [2336], [INFO],,"Security Key Serial number :1790439015"
Jun 04, 11:55:11, [2336], [INFO],,"check rfs on winnt..."
Jun 04, 11:55:11, [2336], [WARNING],,"An instance of the service is already running. 1056"
Jun 04, 11:55:11, [2336], [INFO],,"LoadIberStrings() - Loaded version 6.7.20.0, C:\BOOTDRV\ALOHA\bin\IBERSTR.DLL"
Jun 04, 11:55:12, [2336], [INFO],,"TIMEZONE=INTL - using time zone information from the BOH computer"
Jun 04, 11:55:12, [2336], [INFO],,"TIMEZONE: Reading C:\BOOTDRV\ALOHA\data\timezone.ini"
Jun 04, 11:55:12, [2336], [INFO],,"TIMEZONE: Standard Name = Central Standard Time"
Jun 04, 11:55:12, [2336], [INFO],,"TIMEZONE: Daylight Name = Central Daylight Time"
Jun 04, 11:55:12, [2336], [INFO],,"TIMEZONE: Successfully read the Timezone.ini contents"
Jun 04, 11:55:12, [2336], [INFO],,"TIMEZONE: operating system time zone settings match values in TIMEZONE.INI"
Jun 04, 11:55:12, [2336], [INFO],,"CTLSVR: Is NOT running in SQLMODE."
Jun 04, 11:55:12, [2336], [INFO],,"CTLSVR: bRobust = FALSE"
Jun 04, 11:55:12, [2336], [INFO],,"CTLSVR: Begin initializing network..."
Jun 04, 11:55:13, [2336], [INFO],,"Initializing network..."
Jun 04, 11:55:13, [2336], [INFO],,"NBReset32: TOTALNETBIOSSESSIONS=50, overriding default of 16 sessions"
Jun 04, 11:55:13, [2336], [INFO],,"Node = 15006 String = 'BFAAG'"
Jun 04, 11:55:13, [2336], [INFO],,"NBInit()-> Before NBAddName()-> StationName = "IBERBFAAG ""
Jun 04, 11:55:16, [2336], [INFO],,"NBInit()-> After NBAddName()-> StationNumber = 2"
Jun 04, 11:55:16, [2336], [INFO],,"NBInit()-> Before NBAddGroupName()-> SessionName = "IBERLINK""
Jun 04, 11:55:19, [2336], [INFO],,"NBInit()-> After NBAddGroupName()-> SessionNumber = 3"
Jun 04, 11:55:19, [2336], [INFO],,"Station number 2, session 3"
Jun 04, 11:55:19, [2336], [INFO],,"Network initialization complete."
Jun 04, 11:55:19, [2336], [INFO],,"TIMEOUT ALERT!!! NBInit took 6.147000 seconds our threshold is 5.000000"
Jun 04, 11:55:19, [2336], [INFO],,"CTLSVR: Done initializing network."
Jun 04, 11:55:19, [2336], [INFO],,"Security: Parsing SEC codes from ini file: C:\BOOTDRV\ALOHA\data\Aloha.ini"
Jun 04, 11:55:19, [3328], [INFO],,"RegrindManager() (thread) - Begin Run()"
Jun 04, 11:55:19, [2336], [INFO],,"Security: Ini key serial: 1790439015"
Jun 04, 11:55:19, [2336], [INFO],,"Security: Ini key number: 68083"
Jun 04, 11:55:19, [2336], [INFO],,"Security: Loading hasp key information from local machine"
Jun 04, 11:55:20, [2336], [INFO],,"Security: Hasp key serial: 1790439015"
Jun 04, 11:55:20, [2336], [INFO],,"Security: Hasp key number: 68083"
Jun 04, 11:55:20, [2336], [INFO],,"Security: Unable to read redundancy information"
Jun 04, 11:55:20, [2336], [INFO],,"CTLSVR: Start background processing..."
Jun 04, 11:55:20, [2336], [INFO],,""
Jun 04, 11:55:20, [3384], [INFO],,"CTLSVR: Beginning broadcast thread..."
Jun 04, 11:55:51, [2336], [INFO],,"** CtlSvr switching Broadcast mode from Both to NetBios."
Jun 04, 11:56:05, [2352], [INFO],,"purgeDays=14 : Try to delete all aged zipped debout files..."
Jun 04, 12:07:22, [2336], [INFO],,"BOH requesting recovery from fileserver down but denied because CtlSvr is in NON ROBUST mode
 
How many NIC's do you have in this Win 7 box? IPv4 NIC needs to be 0. Double check this on both ends.
 
One NIC and it is set to Lana 0 for IP4. IP6 is disabled
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top