Got the scary Grey screen this morning.
After many attempts, I got to Safe Mode. Took a quick look around to see if anything was a bit weird with any of my settings. Not that I could tell. And then I restarted my computer thinking that problems were resolved during the Safe Mode boot up repair.
BUT after shutting down and restarting, I couldn't boot up! It either turns on, and the screen doesn't light up so I don't know what's happening (doesn't sound like the processor is doing anything) or I get the Grey screen that tells me "Illegal instruction at %SRR0:00014200 %SRR1:01420000..
and Firmware prompts me to type "mac-boot" or "shut-down"
If I type "mac-boot" it starts to boot, but goes to folder and flashing "?" icon and just sits on that screen.
If I restart and stick in my Software Install and Restore disk and hold down "C", it'll start to boot, but it will tell me to restart the computer in the middle of it...
Then I start all over again.
I'm on a 4 month old Apple PowerBook G4. I haven't installed any extra hardware. And haven't installed extra software just recently.
I just turned it on this morning and there the scary grey screen was.
Any suggestions?
After many attempts, I got to Safe Mode. Took a quick look around to see if anything was a bit weird with any of my settings. Not that I could tell. And then I restarted my computer thinking that problems were resolved during the Safe Mode boot up repair.
BUT after shutting down and restarting, I couldn't boot up! It either turns on, and the screen doesn't light up so I don't know what's happening (doesn't sound like the processor is doing anything) or I get the Grey screen that tells me "Illegal instruction at %SRR0:00014200 %SRR1:01420000..
and Firmware prompts me to type "mac-boot" or "shut-down"
If I type "mac-boot" it starts to boot, but goes to folder and flashing "?" icon and just sits on that screen.
If I restart and stick in my Software Install and Restore disk and hold down "C", it'll start to boot, but it will tell me to restart the computer in the middle of it...
Then I start all over again.
I'm on a 4 month old Apple PowerBook G4. I haven't installed any extra hardware. And haven't installed extra software just recently.
I just turned it on this morning and there the scary grey screen was.
Any suggestions?