Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Help WEIRD ONE Magix 4.0 no busy return on PRI

Status
Not open for further replies.

rmelan47

Programmer
Dec 15, 2004
56
US
When customer dials a busy telephone number they get disconnect not a busy signal. This is a LD only PRI, no local calling. Any IDEAS??????????????
 
Well, you could print and post your PRI tables, but I would probably be talking to the VENDOR.

Sounds to me like a conflict between how the System is set up and how the Service is set up.

I know of nothing in the LEGEND/MAGIX end that would do this, but again, it could be a conflict.
 
Thanks for good answer, I did not think that Merlin would cause a problem. I have installed 100+ T1 (plain & PRI)and never had this trouble.

Here is print

PRI INFORMATION



Slot 2 Switch: 5ESS

System: By line

BchnlGrp #: Slot: TestTelNum: NtwkServ: Incoming Routing:
1 2 CallbyCall By Dial Plan

Channel ID: 23 22 21 20 19 18 17 16 15 14
13 12 11 10 8 7 6 5 4 3
2 1

Line PhoneNumber NumberToSend
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
823
824
825
826
827

Network Selection Table

Entry Number: 0 1 2 3
Pattern to Match: 101**** 10***

Special Service Table

Entry Number: 0 1 2 3 4 5 6 7
Pattern to Match: 011 010 01 00 0 1
Operator: none OP OP OP/P OP none none none
Type of Number: I I I N N N N N
Digits to Delete: 0 0 0 0 0 1 0 0

Call-By-Call Service Table

Entry Number: 0 1 2 3 4
Pattern 0: 0
Pattern 1: 1
Pattern 2: 2
Pattern 3: 3
PRI INFORMATION


Pattern 4: 4
Pattern 5: 5
Pattern 6: 6
Pattern 7: 7
Pattern 8: 8
Pattern 9: 9
Call Type: BOTH BOTH BOTH BOTH BOTH
NtwkServ: No Service
DeleteDigits: 0 0 0 0 0

Entry Number: 5 6 7 8 9
Call Type: BOTH BOTH BOTH BOTH BOTH
NtwkServ:
DeleteDigits: 0 0 0 0 0

Dial Plan Routing Table

Entry Number: 0 1 2 3
NtwkServ: Any service Any service Any service Any service
Expected Digits: 4 4 4 4
Pattern to Match: 5574 3339 9791 2637
Digits to Delete: 4 4 4 4
Digits to Add: 5574 771 772 773

Entry Number: 4 5 6 7
NtwkServ:
Expected Digits: 0 0 0 0
Pattern to Match:
Digits to Delete: 0 0 0 0
Digits to Add:

Entry Number: 8 9 10 11
NtwkServ:
Expected Digits: 0 0 0 0
Pattern to Match:
Digits to Delete: 0 0 0 0
Digits to Add:

Entry Number: 12 13 14 15
NtwkServ:
Expected Digits: 0 0 0 0
Pattern to Match:
Digits to Delete: 0 0 0 0

 
Merlinman


By the way the vendor is a new one, that I've never heard of
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top