Help on VSuperloops

[MetlePro]

Hi guys,
I'm having a strange problem on a o61c regarding Virtual Superloops.
I don't get Free tn's when i create a Virtual Superloop
get a no free units error code when doing a luvu on i2002.
My licenses are correct, and I've followed the same steps i used when i did a previous installation.
The only difference that time was on a o11c
the pbx is running 4.0 software.
Anyone come acrross this one? please help



Pro reffers to my company, not my status

 

[TAnselm]

have to build a new tn on that loop first

 

[MagnaRGP]

Are you luvu'ing the full TN (l s c u) or just c u?

 

[MetlePro]

TAnselm if ur reffering to trying to program a phone on that loop. Have tried it, and get the error message of wrong TN.

MagnaRGP, yes I've tried without specifying the tn and specifying the lsc

no luck

Pro reffers to my company, not my status

 

[johnpoole]

you will not get luvu untill you add a card..

new
cardmlt

168 0 0

then luvu type 3000 will show 16 open ports

john poole
bellsouth business
columbia,sc

 

[yyrkroon]

go to ld 22 and prt your cequ and post it

 

[911guru]

You still need available IP User ISMs to build a TN on a Virtual Superloop. IP Licenses are never 'free'.

If you build a Phantom Superloop, then you can build 'free' Phantom TNs which are digital and analog sets.



911Guru

http://pbx-e911.com

 

[phones1]

johnpoole (Programmer) is right

Remember if it doesn't work hit it harder

Scott UK

 

[MetlePro]

So I add the card using the Vsupl TN or should i substitude the 168 0 0 with the physical VGMC TN?

Is this Mandatory? and if so is it only on large systems?

My confusion is that i can't remember having to do this on a smaller system.

Pro reffers to my company, not my status

 

[johnpoole]

use your actual v loop not the 168 in the example.. in any size system you can either add the 1st phone of add the card. to get a tn in the vsdn table prior to adding a station, add the mlt

john poole
bellsouth business
columbia,sc