Help....LD 20 prt tnb and this is what i get....???????

[chufski]

HI All
Im installing otm soon and have found out theres a tn 5 10 that seems to be corupted but all i can seem to find is it goes back to bfs keys.........im pulling my hair out with this one....have a look at this and c whot u think.......
DES M3310
TN 005 0 00 10
TYPE 2616
CDEN 8D
CUST 0
AOM 0
FDN
TGAR 1
LDN NO
NCOS 0
SGRP 0
RNPG 0
SSU 0010
LNRS 16
XLST
SCPW 269
CLS TLD FBD WTA LPR MTD FNA HTA ADD HFA
MWA LMPN RMMD SMWD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD CCSD SWD LNA CNDA
CFTA SFA MRD DDV CNID CDCD MSID DAPA BFED RCBD
ICDD CDMD MCTD AUTU
GPUA DPUA DNDD CFXD ARHA CLTD ASCD
ABDD CFHA FICD NAID BUZZ
UDI HBTA AHA DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD EXR0
USRA ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3
CPND_LANG ENG
RCO 0
BFTN 000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 01
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
000 0 00 00
Keeps reapeating the 0000000000
then i get this.........
OVL000
>*BUG1337 + 10621E88 10591678 10BB3EA8 10BB3DF6 10BB3D08
*BUG1337 + 10B9BA8E 10B966D4 117B3992 117B21F8 117A79D4
BUG1337 + 117A683A 117A6726 117A6404 108BDF0C 108BDD14
BUG1337 + 108ED490 108EC356 108EBC08 108EA18C 108E766E
BUG1337 + 10DA334A 10DA279C 10DA2444

BUG1337
BUG1337 : 185
BUG1337 + 10621E88 10591678 10BB3EA8 10BB3DF6 10BB3D08
BUG1337 + 10B9BA8E 10B966D4 117B3992 117B21F8 117A79D4
BUG1337 + 117A683A 117A6726 117A6404 108BDE42 108BDD14
BUG1337 + 108ED490 108EC356 108E77C8 108E767C 108DF488
BUG1337 + 108D880A 108D7F90 10DA2682 10DA2444

OVL000
>ERR BUG1337

BUG1337
Protected terminal loop block pointer is nil called by (CH.TN.CONVERT)
=
Queuing

Severity: Minor

Be great if u can help as i know Otm wont work with this faulty dn in the system...................

Thanks

 

[johnpoole]

you need someone in pdt to fix that. if it was a new install i would do a new install.. otm just makes things like this corruption worse

john poole
bellsouth business
columbia,sc

 

[acewarlock]

Have you tried making a change to it to see if it will let you do that and then try printing it again.

 

[scrumpy73]

Thanks for the replies.....acewarlock tried doing a change to the tn and it made no diffrence...):......
Johnpoole if you can recomend anyplaces/anyone for help on PDT as i know this can kill your switch.......
Thanks

 

[PERRYPJ]

YOU WILL NEDD TO FIND A VENDOR THAT HAS ACCESS TO NORTEL TECH

OLD ROLMEN WORKING ON NORTELS

 

[johnpoole]

YOU WILL NEDD TO FIND A VENDOR THAT HAS ACCESS TO NORTEL TECH

you can check the nortel website, locate a partner link.. and yes pdt is a quick way to fix any problem..it is also a quick way to turn your switch into the next layer of a landfill..

do you have a backup that may not be corrupt? you can reload that from command and those commands are ones that we can help with.. no one gives pdt commands or passwords on line...

john poole
bellsouth business
columbia,sc

 

[bignose21]

Looks like a possible problem in DN Tree/TN Tree in pdt. Not saying it will sort out your problem but some times on sysload the software repairs itself, usually takes about 3 sysloads on the trot. If not as above contact a vendor to get someone to sort it out in pdt.

Andy.

 

[chufski]

thanks for the reply Andy...if anyone could point me in the right direction of the pdt commands i need then im sure i can work through it.

 

[acewarlock]

Do you have the PDT Password?
If not get a Vendor/Nortel to do it.
if your not going to call a Vendor/Nortel then try a INI first and if that doesn't clear it, then do a SYSLOAD.

 

[chufski]

acearlock yes i have the pdt password i will try the ini a few times first then try a sysload if all else fails.......
thanks

 

[chufski]

acewarlock/bignose21 thanks for the help worked a treat did a ini on the switch a couple of times and now the tn is Unequiped and no more bug codes..............Thanks for the help..........

 

[acewarlock]

Glad I could help!

 

[Firebird Scrambler]

Yes the only way that I know is via "pdt". even then I would remove the TN, do a EDD followed by a reboot (if possible) to be certain that the corruption has gone. If you are installing OTM, then don't be surprised if you get some more problems!. I prefer to use the LD commands. I used to get plenty of TN corruption on systems that had used MAT/OTM for a while. Usually when one of them uses BFS!.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://mysite.orange.co.uk/firebird_scrambler

Useful Nortel forum at

http://www.tspforum.com

If it's working, then leave it alone!.

 

[chufski]

Thanks for the comment Firebird will take it all on board if it arises again, if it does can i contact you for more info?........................

Thanks

Chuf

 

[Firebird Scrambler]

I'll help you where I can. That is why we have this excellent forum to pass on help and ideas!.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://mysite.orange.co.uk/firebird_scrambler

Useful Nortel forum at

http://www.tspforum.com

If it's working, then leave it alone!.