Hellooooo where is 2.1(22)

[Spanning]

or will it be 2.1(23)
oopps it crashed again
2.1(24)
oppss............

Avaya get the drift get a grip all the Nortel Man will take over i know you are there but are you listening.

p.s.

An Avaya Fan atleat for now.

 

[NuggiFirst]

@ Kris G

Since you have the 2.1 (24):

Have you tested Softconsole 2.1.7 against 2.1 (24)?

Can you confirm that a call that is queued against a busy extension (Alt+B) times out with the correct information? Is it possible to see which extension it is returned from?

We have tested Softconsole 2.1.7 against 2.1 (23), and it still doesn't work...

 

[IPOUK]

That's the only bug fixed in 2.1.7!!! Let's hope it just needs 2.1(24) - 24 was only meant to fix the reboot problem when users forwarding to a hunt group where all the agents were busy though...............

 

[NuggiFirst]

IT DOESN'T WORK!!!

Now it comes back as a yellow call, with a "timeout" tag, but no other indications...

How the f... can things like this happen!

 

[IPGuru]

How th f... can things like this happen?

Programmers are human..... or at least very close
Even I am known to make the odd mistake, still it would be nice if they would try not to break the things that work & concentrate on adding the bugs to the new features

 

[Spanning]

IP Office 2.1(24) Resolved Field Issues

The following field issues have been addressed in the IP Office 2.1(24) software:

• For the locale CHS, we have reduced the required sampling size for disconnect tones within the ATM module so that the disconnect tone is more
reliably detected.

• R2 Signalling problems in China have been resolved.

• The comma (“,”) has been removed from the Called Party Number within
CDCall Messages for correct delta server operation.

• A problem with the listen only mode for IP Phone power conference users has been resolved.

• Overflow Groups now operate correctly when Queuing is enabled.

• IP Phone Paging can no longer cause the system to reboot.

• Using IP Phones and TAPI to make and receive calls can no longer cause certain calls to be disconnected.

• When using the PhoneManager Pro application the “ring back” feature did not always work, this has been corrected.

• Transfers initiated by Phone Manager Pro now release VCM channels correctly.

• The IP Office now performs a check to make sure that more than 2 free conference channels are available when creating a conference.

• Call forwarding now works correctly when used in conjunction with forced account code.

• Assisted transfer via voicemail pro now correctly dials external numbers.

• Incoming calls on an analogue module that are picked up on a remote site are now processed correctly.

• Pulse Dialling over analogue trunks has been fixed for Russia.

• Message Waiting Indication Lamp fixed on Pot phones for Italy.

• The configuration now keeps track of remote information on configuration merges so that DSS settings can be retained in the event that a remote user disappears.

• It is now possible for digits that are part of an ‘x’ or ‘N’ shortcode entry (for pattern matching) to be part of the ‘N’ for the output number.
For example:
ShortCode=0xxxx39N;
Number=0N
If the dialled number was 01707392200 then the value of ‘N' would become 1707392200

• The system will not now reboot when decoding a capability table entry which had no capability field.

• The WAN3 unit can no longer cause watchdog timeouts to occur resulting in the unit rebooting.

• IP Phone and power conferencing issues have been resolved.

• The 44xx series of phones now work similarly to the other digital phones when updating the date & Time. The date and time is now updated when a user uses the handset (so that the display is refreshed), as well as after a
24hr period of time.

• DS modules now display “Euro font” characters correctly.

and there is more at this point i decided to take a faint break , you have to wait for the rest on Monday.I must say so far so good with 2.1 (24).

Tra...

 

[MTVilla]

I still don't see it on the site. I can't even log in to their ftp site with their username/password. Hmmm...