Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Headset Key Programming On IPS

Status
Not open for further replies.

lcns

Technical User
Jan 29, 2007
26
US
Need some clarification on programming a headset key on the Dterm phone usinf CAT

My Steps:

9000>142,01 (DE)
Displayed 9000>142,01:142-
I entered 1090 EXE
Data Not Found was the response.

I noticed the manual says F1090 - does this "F" need to be entered and if so - How?
 
Hex for Dtrem Programming

A = Programmable button 1 (LK1)
B = Programmable button 2 (LK2)
C = Programmable button 3 (LK3)
D = Programmable button 4 (LK4)
E = Programmable button 5 (LK5)
F = Programmable button 6 (LK6)




Regards,

Dr VuDu
 
So on a Dterm Series I 16 button phone how would i program the headset key on key 01?

I am still not clear.

Thanks for the help!
 
First make sure you are not programming on the phone you are trying to change.

Second if there is a password enter it in 03>7>

Third move your Prime line to another key.
9000>142,01>CCC EXE
9000>142,02>142 EXE

Then program the headset/handset key
9000>142,01>F1090

you should be golden at this point. Data not found is a generic message that lets you know that its a missed key stroke or the password hasn't been entered.




Regards,

Dr VuDu
 
I verfied there was no password on the system.

How can you tell if a key has no assigment?

Using CAT how do I enter the "F" in the command line?

Thanks,

 
if the key has an assignment then it will display on the lcd after the second DE


9000>142,01 press DE
if it has an assignment you will see
9000>142,01>142 (for the prime line)
if it has no assignment it will display
9000>142,01>

on an I series phone top row button 6 from the left is F. button 1 being the top left button.

Regards,

Dr VuDu
 
here is what i did/saw:

9000>142,01 (DE)
Displayed 9000>142,01:142-

Does this mean the key had no assignment?

 
9000>142,01:142-
right now that key is assigned as the extension 142

if you want to make it a H/H key put in F1090 EXE
but you will have to reassign 142 on another button
Ergo. pick a button (142,02 through 142,16) buttons 2-16




Regards,

Dr VuDu
 
sorry credit goes to OZZIEGEORGE for that FAQ

Regards,

Dr VuDu
 
Thanks, I think it makes sense now.
 
One more question - would the "F" key be the same as the HELP key?
 
Forget last submission - found in previous thread


on an I series phone top row button 6 from the left is F. button 1 being the top left button
 
Hi,
To programme the headset key on an i series phone you need to leave the 1st key as the my line key for example

9000>142,01>142

otherwise you will not be able to dial out. my advice would be to make the last key or key 8 the headset key and leave key 1 as the my line key. so fo example

9000>142,16>F1090.

Hope this helps!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top