Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Have I covered all my bases?

Status
Not open for further replies.

JediBMC

MIS
Dec 5, 2003
178
0
0
US
I am trying to determine if an legacy outbound WATTS trunk is still in use. I have used ASA's Trunk Analyzer and see no traffic on the trunk (ok, there are 2 calls on it...). I have also listed all of the route patters using the trunk group and found that the only ARS routes are for:

00
011
211
311
511
711
10xxx011

Is there anything else I should look at to ensure that this trunk is not being utilized. I would like to remove it, as all of our traffic should be using our 3 ISDN-PRI.

Thanks!

-Brian-
I'm not an actor, but I play one on TV.
 
This may help

try running from the SAT
"list measurements trunk-group hourly x"
This will give an hourly breakdown of usage, seizures etc

"list measurements trunk-group summary yesterday-peak"
This will give the same sort of info, but as a summary for the previous day
 
Perfect, thank you Avayauser1!


-Brian-
I'm not an actor, but I play one on TV.
 
Just busy it out!

When someone complains, you know it is being used!

Matt
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top