If the harddrive fails to load will the telephony side of the BCM still work?
That's basically the question. I had a GASM8 go bad as a result of a lightning hit to a phone connected to it. It also took out the DTM and a DSM 32 in the system. I replaced the modules and now they won't intialize. The status light on the three MBM's stay blinking. The DTM is working.
I hooked up a monitor to the BCM to watch the boot up and the autocoreupload file fails.
It's a BCM 400 4.0 with a gasm8, dsm16, dsm32 and a dtm in that order from top to bottom. I know there is a lot of info I left out, but I was trying to make the post short.
That's basically the question. I had a GASM8 go bad as a result of a lightning hit to a phone connected to it. It also took out the DTM and a DSM 32 in the system. I replaced the modules and now they won't intialize. The status light on the three MBM's stay blinking. The DTM is working.
I hooked up a monitor to the BCM to watch the boot up and the autocoreupload file fails.
It's a BCM 400 4.0 with a gasm8, dsm16, dsm32 and a dtm in that order from top to bottom. I know there is a lot of info I left out, but I was trying to make the post short.