Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Handset Vol Settings
- Thread starter RConcepts
- Start date
- Thread starter
- #2
RikRodgers
Vendor
Right, then, with rec vol=set, and her phone idle, (not on an active call), have her pick up her handset, adjust the volume to her liking, and hang up. The system will store that preference.
- Thread starter
- #5
- Thread starter
- #7
Found it! **CONFIG with the pass: CONFIG not ADMIN. I’m learning though!!
It was set to SET.. so I then go over to the phone I need the receiver volume changed, set the volume then set the handset back on the hook. The system should save the setting as a new default? But it doesn’t. Let me get this straight, I can’t access System Programming from the said terminal I’m trying to change, so I’m doing this all through a master terminal, Right!
And RikRodgers Thank you for all your help on ALL of my posts!
It was set to SET.. so I then go over to the phone I need the receiver volume changed, set the volume then set the handset back on the hook. The system should save the setting as a new default? But it doesn’t. Let me get this straight, I can’t access System Programming from the said terminal I’m trying to change, so I’m doing this all through a master terminal, Right!
And RikRodgers Thank you for all your help on ALL of my posts!
RikRodgers
Vendor
First, I'm glad to help. Tomorrow it'll probably be me asking you to get me through a sticky spot.
Right. You need at least a 7310 to get into system programming.
Yes, that should have worked. I'd try changing the volume on another set, and see if that holds. I do seem to remember an issue with some really early revision sets (7100's?) that wouldn't retain the setting. I haven't heard of that being an issue on any 7208's, though.
Maybe someone else has an idea?
Right. You need at least a 7310 to get into system programming.
Yes, that should have worked. I'd try changing the volume on another set, and see if that holds. I do seem to remember an issue with some really early revision sets (7100's?) that wouldn't retain the setting. I haven't heard of that being an issue on any 7208's, though.
Maybe someone else has an idea?
RikRodgers
Vendor
On second thought, I may be assuming something basic here.
On her set, when idle, pick up her handset, and press intercom. Then adjust the volume, and hang up.
On her set, when idle, pick up her handset, and press intercom. Then adjust the volume, and hang up.
- Thread starter
- #10
- Status
Similar threads
- Locked
- Question
- Locked
- Question
