I have a customer with an existinb BCM450 R6.0 & IP Office R9.0.
the BCM has a VOIP gateway lices & the IPO has a VCE networking license & we need to connect them via H323.
now calls from BCM to IOP going fine but calls from IPO to BCM does not go out.
in the IPO I set the suppelmentary services to H450 & in the BCM I set the trunk type to IPT.
the IPO SC config is:
8N;
Dial
N
5
in the BCM, I set the target line for the incoming digits & assigned it to a digital set.
Any Idea why I could not reach the BCM from the IPO?
BR,
Seraj
the BCM has a VOIP gateway lices & the IPO has a VCE networking license & we need to connect them via H323.
now calls from BCM to IOP going fine but calls from IPO to BCM does not go out.
in the IPO I set the suppelmentary services to H450 & in the BCM I set the trunk type to IPT.
the IPO SC config is:
8N;
Dial
N
5
in the BCM, I set the target line for the incoming digits & assigned it to a digital set.
Any Idea why I could not reach the BCM from the IPO?
BR,
Seraj