Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

H.323 SIP extension

Status
Not open for further replies.

newmx

Technical User
Feb 17, 2010
4
ES
Hi everybody,

I know that on Call Manager 2.4 you have only H.323. But on which version do we have both? I mean: SIP and H.323.
Is there any version that you have only SIP?

Thanks in advanced.
 
I run CUCM 6 and have played with CUCM 7. As far as I know CallManager from version 4.x and above support SIP. No, I don't believe there is a CllManager version that supports ONLY SIP, but to answer your question, 4.x and above support both h.323 and SIP.
 
Thank you very much! That is what I needed
 
Just a word of caution. In call manager 4.x you get the addition of trunk side SIP (I beleive it is 4.2 but don't quote me on that). If you are looking for SIP endpoints you have to be at version 5 and above for that added feature.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top