Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

H.323 SIP extension

Status
Not open for further replies.
newmx

newmx

Technical User
Feb 17, 2010
4
ES
Hi everybody,

I know that on Call Manager 2.4 you have only H.323. But on which version do we have both? I mean: SIP and H.323.
Is there any version that you have only SIP?

Thanks in advanced.
 
Sort by date Sort by votes
I run CUCM 6 and have played with CUCM 7. As far as I know CallManager from version 4.x and above support SIP. No, I don't believe there is a CllManager version that supports ONLY SIP, but to answer your question, 4.x and above support both h.323 and SIP.
 
Upvote 0 Downvote
Thank you very much! That is what I needed
 
Upvote 0 Downvote
Just a word of caution. In call manager 4.x you get the addition of trunk side SIP (I beleive it is 4.2 but don't quote me on that). If you are looking for SIP endpoints you have to be at version 5 and above for that added feature.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Gnjiro
  • Locked
  • Question
Cisco Ip Phone 7841, 7821 Delay when making call both inbound and outbound in sip protocol
Replies
3
Views
305
thepfy
thepfy
Diya Freahat
  • Locked
  • Question
called name between avaya I P office & CUCM via SIP trunk
Replies
1
Views
192
Diya Freahat
Diya Freahat
DTGMI
  • Locked
  • Question
Nortel to Cisco VG310 & 4431 SIP GWs
Replies
0
Views
94
DTGMI
DTGMI
Qzwsa
  • Locked
  • Question
Inband DTMF to SIP device for zone paging
Replies
1
Views
129
LoPath
LoPath
Geordie12567
  • Locked
  • Question
Maximum concurrent calls on a SIP trunk with CUCM and Cube
Replies
2
Views
296
biglebowski
biglebowski

Part and Inventory Search

Sponsor

Back
Top