GJC is present

[aurthur]

Hi all,

I upgraded MXONE TSW/SP07 1 more MAG. Currently, our system have 2 LIms, LIM1 have 2 MAGs, LIM2 have 1 MAG. I upgrade 1 more MAG for LIM2.

But when set up link for GJUL4 board, it has error

<GJLCP:LIM=1;
GROUP JUNCTOR LINE CONNECTION DATA
EQU GS MULT NO GS CON LIM
1-1-00-0 0-8 0 2
1-0-00-0 0-0 0 2

END

<GJLCP:LIM=2;
GROUP JUNCTOR LINE CONNECTION DATA
EQU GS MULT NO GS CON LIM
2-0-00-0 0-1 0 1

END

<GJLII:EQU=2-2-00-0,CHL=32;

NOT ACCEPTED
GJC IS PRESENT

position 1-1-00 is new GJUL4 on LIM1.

Please help me to solve it. How can I do now?

Thanks a lot

 

[pcasi]

If you are not using GS, GJUL boards should be placed on the same MAG and BPOS on both LIMS, i.e.:

LIM1 GJUL 1-1-00 connected to LIM2 GJUL 2-1-00

Also check your command syntax, if you only have 2 MAGs on LIM 2, BPOS 2-2-00 is not a valid position, i think the command should be:

GJLII:EQU=2-1-00-0,CHL=32;

 

[aurthur]

Hi pcasi,

It doesn't work

what can I do now?

THanks

 

[securipdect]

Hello,

(pcasi was right)
"GJUL boards should be placed on the same MAG and BPOS on both LIMS, i.e.:LIM1 GJUL 1-1-00 connected to LIM2 GJUL 2-1-00"

what was set in limdisp?

did you try:

GJLII:EQU=2-1-00-0,CHL=32,GSMULT=0-7;

BR

 

[aurthur]

I already create GJLII:EQU=2-1-00-0,CHL=32,GSMULT=0-7; but still have problem. Because LIM1 is duplicated, LIm2 is not.
First link ( GJUL4) have the same position, so second link i think we can out anywhere in LIM?

My problem is when show link in LIM2 it don't recognize new GJUL4, the error is NOT ACCEPTED, GJC NOT PRESENT

Regards

 

[securipdect]

wrong cabling???

 

[aurthur]

Yes, you're right about the position. GJUL4 must be the same position in each LIM, last time I try to input GJUL4 in MAG (already have GJUL4) but it don't work. When moving to new MAG ( don't have GJUL4) and the same position on both side. It works
Thanks a lot