Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

getting sch6232 on changing of DCH info 1

Status
Not open for further replies.

mindamartine

Technical User
Mar 25, 2006
96
US
Option 11
Changing PRI from TIE line currently connected to an Option 81 to go directly to a Centruy Link DID PRI
I have built the new DID Route to Century Link just like a Century Link DID route I have on the Option-81.
The RDB interface is NI2. When I try and change the DCH IFC from SL1 to NI2 on the Option 11 I am getting a
SCH6232 The interface type entered is incompatible with a CTYP of DCHI or SPDC. The CTYP must be MSDL. (To replace current version)

How do I fix this?
Thanks
 
What kind of T-1 card is in the Opt. 11 ? If it is the old NTAK09 then you have an onboard D-channel daughterboard that may be a DCHI card that is not compatible with NI2. Also changing the IFC type on a d-channel usually never works out very well, better to out it and rebuild it. The other type of d-channel card is the downloadable MSDL type or you can relpace it with a TMDI card.
 
It is a 1.5MB DTI/PRI with a CC and D-channel daughterboard

I did out the D-channel and then try and rebuild it. Same code.
 
You probably have the old DCHI card, I believe an NTAK93 is what it is. You will need an NTBK51BA
 
hanged the DCH card to the NTBK51 and now when I try and build the DCH in LD 17 I get a SCH0531
 
Out your trunks and route and then build the d-channel, then the route, then the trunks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top