Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

getting more digits in CDR 2

Status
Not open for further replies.

mrmhar

Technical User
Feb 20, 2008
57
SA
Hi,

I have succesion cs1k and E1 lines connected to.
the problem is in the CDR reports i got whatever the user dial for example:
if he is dialing 6916922 and by mistake he dialed more digits as 691692222 all digits will come not the original number only.


so this cause a problme if anyone called a bank and enter his account number it will comes to the CDR

how i can fix this problem

Thaaaaaaaaaanks in advance

 
You didn't answer the question? I did not say to change it to yes. In order to change it to no you have to INI the switch after teh change.

Signature===========================================

Aastra Authorized Reseller
 
mrmhar, if your test after lowering the EOD and ODT was to just dial 20 digits in a row, then of course it will not work.

Typically, people dial digits, then wait (at least 256 milliseconds) then enter account information.

I think it did work.

As for OPD, dialing 20 digits in a series results in 20 digits being outpulsed as far as I know.

Another prompt that might help is "NDP" which limits the number of digits output in CDR.


~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]
 
i answered GHTROUT not Posttnphoneman

now i will try OPD and i believe it will work
 
now i have changed the OPD to yes

the E1 route (Route 21) working fine and i didn't get any extra digits
but with the analogue one still i am getting extra digits (route 1)
these are the routes


REQ: prt
TYPE: rdb
CUST 0
ROUT 1

TYPE RDB
CUST 00
ROUT 1
DES BT_0
TKTP COT
NPID_TBL_NUM 0
PRIV NO
RPA NO
SAT NO
IDEF NET
RCLS EXT
VTRK NO
NODE
DTRK NO
ISDN NO
PTYP ACO
AUTO YES
ACMP NO
ICOG IAO
RANX NO
SRCH RRB
TRMB YES
STEP
ACOD 5501
TARG 02 03 04 06 07 08 09 10 11 12 13 14 15 16 17 18
19 20 21 22 23 24 25 26 27 29 31
CLEN 1
BILN NO
OABS
TIMR ICF 512
OGF 512
EOD 5120
DSI 5120
NRD 10112
DDL 70
OOD 1
ODT 4096
RGV 640
FLH 510
GTO 896
GTI 896
ARP 3
SFB 3
CRD 512
TFD 0
LEXT 100
SST 3 0
DTD NO
SCDT NO
2 DT NO
NEDC ETH
FEDC ETH
CPDC NO
SPCT IMM
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
RVSD 08 31
ILLR 02 02
DDO NO
DRNG NO
CDR YES
INC YES


PAGE 002

LAST YES
QREC YES
OAL YES
AIA YES
OAN YES
OPD YES
NDP EXC 0
CDRX YES
NATL YES
SSL
CFWR NO
IDOP NO
MUS YES
MRT 16
MR RVB
PANS YES
MANO NO
EQAR NO
FRL 0 0
FRL 1 1
FRL 2 2
FRL 3 3
FRL 4 4
FRL 5 5
FRL 6 6
FRL 7 7
TTBL 0
ATAN NO
OHTD NO
PLEV 2
OPR NO
RCAL NO
MCTS NO
ALRM NO
ART 0
PECL NO
DCTI 48
TIDY 5511 1
SGRP 0
ARDN NO
AACR NO

REQ: prt
TYPE: rdb
CUST 0
ROUT 21

TYPE RDB
CUST 00
ROUT 21
DES DOD
TKTP DID
NPID_TBL_NUM 0
SAT NO
IDEF NET
RCLS EXT
VTRK NO
NODE
DTRK YES
DGTP DTI2
ISDN NO
DSEL VOD
PTYP DCO
AUTO NO
DNIS NO
ICOG OGT
RANX NO
SRCH LIN
STEP
ACOD 5564
TARG 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17
18 19 20 21 22 23 24 25 26 27 28 29 30 31
CLEN 1
OABS
INST
IDC YES
DCNO 2
NDNO 2 *
DEXT NO
DNAM NO
MFC R2MF
INDMF NO
MFCO 1
OPP NORM
SWP NORM
TIMR MFC 12032
MFO 0
MFID 0
ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
FLH 510
GTO 896
GTI 896
SFB 3
SST 5 0
DTD NO
SCDT NO
2 DT NO
NEDC ORG
FEDC ORG
CPDC NO
DLTN NO
HOLD 02 02 40
SEIZ 02 02


CDRX YES
NATL YES
SSL
CFWR NO
IDOP NO
MUS NO
MR NO
PANS YES
MANO NO
EQAR NO
FRL 0 0
FRL 1 1
FRL 2 2
FRL 3 3
FRL 4 4
FRL 5 5
FRL 6 6
FRL 7 7
TTBL 0
PNNC NO
ATAN NO
OHTD NO
PLEV 2
OPR NO
MCTS NO
ALRM NO
ACKW NO
ART 0
OPDL 0
TIDY 5564 21
NADT 0
SGRP 0
ARDN RPO
AACR NO

REQ: end
>
 
this is the CDR information for Route 21

CDR YES
INC YES
LAST YES
QREC YES
OAL YES
AIA YES
OAN YES
OPD YES
NDP EXC 0
CDRX YES
NATL YES
 
but Route 21 is working and Route 1 is not

so why ???
 
i did the changes of OPD from NO to yes

it works with Route 21 but didn't work with Route 1
 
when i change the timer in analogue route it works according to GHTROUT reply.

Thanks GHTROUT
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top