Get Mitel UC360 work with unsupported Camera?!

[palatbarn]

Hi,
has someone already get the UC360 connected to an unsupported Network-Camera?
With Release UC360 Firmware 1.0.0.42 only 3 Cameras are offically supported (Sony CH-110, Sony CH-120 and Axis M1054).
I´m trying to get mine connected to an Axis M3203 which already supports ONVIF but still without success.
So If you get it up, please let me know which camera and which special settings you´ve taken.

 

[chep]

Unfortunately just because it says ONVIF compliant doesn't mean that it will work. ONVIF like SIP is a standard that is open to interpretation and each vendor has a different interpretation. Even with cameras from the same vendor, like Axis, they don't all have the same level of S/W in them and they don't all behave in exactly the same manner, which unfortunately means there has to be tweaks made to the product to get them to work. Mitel will be testing additional camera's and adding them to the list of supported cameras moving forward. They will also be adding support for the Axis M1104 Camera and more will be added in following releases of the UC360.

 

[Billz66]

just did some testing with Axis M1054 - latest firmware 5.40.9
UCA with latest firmware 1.0.1.10


Camera comes straight up
- you have to log into the camera and create the ONFIV user as a administrator first and then put that account into the uc360

If I never did anything I'd never done before , I'd never do anything.....