Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
get a dialtone once you get to the IPO 1
- Thread starter dbomb01
- Start date
-
1
- #2
Yes, its called a DISA line. If you got v-mail pro. it can be set up with with your auto attendant greeting using a selector code going to another menu allowing you to enter a password then you get a dial tone (using a wave file)you dial 9 and the number you want to call.
This should give you an ideal how to do this. I would get authorization to do this because of Long distance calls can be made using this DISA.
"A politician is a fellow who will lay down your life for his country.
This should give you an ideal how to do this. I would get authorization to do this because of Long distance calls can be made using this DISA.
"A politician is a fellow who will lay down your life for his country.
- Thread starter
- #3
I'd like to help you but, I hesitate because people are rarely authorized to access DISA (Direct Inward System Access) in a restricted area because they are not allowed to make L.D. calls.
Sorry.
"A politician is a fellow who will lay down your life for his country.
Sorry.
"A politician is a fellow who will lay down your life for his country.
- Thread starter
- #6
I have looked and tried following the other threads but they dont specify exactly how to do it on the vm pro.
According to the other threads I can set up a menu like when I call the main number and press 6 I will get asked for a code then I get a dial tone, but I only get as far as to the menu option. I dial 6 and then I get asked the code I enter it and nothing happens. Is there a specific code I have to enter on the transfer menu in the destination field.
According to the other threads I can set up a menu like when I call the main number and press 6 I will get asked for a code then I get a dial tone, but I only get as far as to the menu option. I dial 6 and then I get asked the code I enter it and nothing happens. Is there a specific code I have to enter on the transfer menu in the destination field.
Sorry, I was on vacation, just got back. Dial tone is a wave file that you can insert in the menu. You should be able to dial 9 then get dial tone from the menu after you dial a 6 and get dead air. Then you can dial an outside number and call out.
"A politician is a fellow who will lay down your life for his country.
"A politician is a fellow who will lay down your life for his country.
To get you started you can create a VMP module and add a Menu with DTMF sequence of 91?????????? then connect it to a transfer to $KEY.
I would typically put a check digit action before that to keep the random dialer out of the system and help reduce the potential for toll fraud.
Kyle Holladay
Certified: ACACN, ACSCI, ACSCM, TIA-CTP
ACE Implement: IP Office
"If it worked the way it should you wouldn't need me
I would typically put a check digit action before that to keep the random dialer out of the system and help reduce the potential for toll fraud.
Kyle Holladay
Certified: ACACN, ACSCI, ACSCM, TIA-CTP
ACE Implement: IP Office
"If it worked the way it should you wouldn't need me
- Status
