Gathering Info from Mitel SX-200

[genesmitty]

I apologize if this has been covered elsewhere in the forums. I have searched quite a bit and cannot seem to find anything that will tell me what i need to know.

I would like to export the information found in Form 9, Desktop Device Assignments into a spreadsheet.

I've inherited an older system and i know that there are quite a few lines programmed that we simply do not use anymore. I can do the data entry manually, however i'm used to Avaya Site Administration software and how easy it is to pull information from the switch.

Any advice would be greatly appreaciated
Thank you

<Genesmitty>
<Mitel Noob Less Than Extrodinaire>

 

[kwbMitel]

Connect to the console/maint port with a serial application 9600/n/8/1

Use form 32

Cursor to form 9 options

Set Application to capture all data appearing on screen

Use Esc+? to initiate whichever menu option says display

**********************************************
What's most important is that you realise ... There is no spoon.

 

[genesmitty]

Solved. Thank You