Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Gathering Info from Mitel SX-200

Status
Not open for further replies.

genesmitty

IS-IT--Management
Dec 26, 2006
42
GB
I apologize if this has been covered elsewhere in the forums. I have searched quite a bit and cannot seem to find anything that will tell me what i need to know.

I would like to export the information found in Form 9, Desktop Device Assignments into a spreadsheet.

I've inherited an older system and i know that there are quite a few lines programmed that we simply do not use anymore. I can do the data entry manually, however i'm used to Avaya Site Administration software and how easy it is to pull information from the switch.

Any advice would be greatly appreaciated
Thank you

<Genesmitty>
<Mitel Noob Less Than Extrodinaire>
 
Connect to the console/maint port with a serial application 9600/n/8/1

Use form 32

Cursor to form 9 options

Set Application to capture all data appearing on screen

Use Esc+? to initiate whichever menu option says display

**********************************************
What's most important is that you realise ... There is no spoon.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top