G350 CLI Commands

[glimma]

I know all of the CLI commands to configure a G700 like:

set interface inband 1 xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
etc etc.

But does anybody know the commands to configure a G350 from the CLI port.

Also in a g700 you need to have 5 ip addresses to configure it, is this the same as a G350.

Thanks.

 

[psepulve]

Morning, G250/G350 have a different CLI set. You can find the CLI guide on the CM docs. I usually use 3 IPs (S8300, IA770, MG) if you have an MS/LSP.

 

[psepulve]

Here's more info...

Main CM Doc Page:

http://support.avaya.com/elmodocs2/comm_mgr/r4_0/avayadoc/03_300151_6/mainmenu.pdf

MG250/350 CLI Reference:

http://support.avaya.com/elmodocs2/comm_mgr/r4_0/avayadoc/03_300151_6/03_300437_3/03_300437_3.pdf

Later.