Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

FTP manual and schedule backups fail only on 4.5 cse1000

Status
Not open for further replies.

1998xj8

Technical User
Jun 12, 2008
221
US
Only the 4.5 switches constantly fail but the 5.0 and 5.5 are fine. Is there a problem on ftp backups with 4.5 ?
 
here is my exact message
Starting Backup according to Rule 3
Backup mode: Manual
Backup Rule type: FTP
AUD000
Backing up reten.bkp
Starting database backup to "/u/bkdb/backup/tmp/":
KEYCODE
DIRECTORY
CONFIG
DATA
HI
ZONE
ESET1
ESET2
NODE
SYSCFG
SMPCONF
ACCOUNTS
ERL
ELIN
SUBNET
NTP
MGC
SYSTEM_PARAMS
Backing up reten.bkp to "/u/bkdb/backup/tmp/"
Database backup Complete!
BKR - Backup preparation to "/u/bkdb/backup/tmp/" completed
BKR - TAR Archiving "/u/bkdb/backup/tmp/" ...
completed
BKR - GZIP Compressing "/u/bkdb/backup/bkdata.tar" ...
100 percent completed
opening FTP session to remote server 10.88.11.41
SRPT4639
FTP to 10.88.11.41 failed on "open session", code=-1, attempt=1; errno=0x3006b.
Manual Backup according to rule failed!
 
can your CS ping the CS at the remote side from 117? Network Techs have it allowed. Are the CS's on the same Subnet - need to be. (Elan)

Mato' Was'aka
 
what errors are you getting on the ftp server? is the account for ftp all ok? We usually see this kind of fail when the password is incrrect

It's not getting any smarter out there. You have to come to terms with stupidity, and make it work for you.
 
the ftp server is pingable from sigserver..all cse1000e components are on same vlan. I can access the ftp folder from call pilot windows explorer so path and pass are fine. its just my nortel 4.5 boxes must have a code problem with opening session properly.Does anyone have access to Nortel knowledge base to search ..this problem must have a patch
 
I'm having the same issue and I think it's because the ELAN isn't routed out where the FTP server sits (by design). Guys I think what M1spezi is saying, is can you ping from ELAN. (there's no TLAN IP on a CS).

Issuing a ping from 117 tests from the ELAN side:
Pinging from the signaling server is from the TLAN side

ld 117

=> ping 10.35.10.18

PING 10.35.10.18 FAILED

=> ping 137.135.128.20

PING 137.135.128.20 SUCCESSFUL

=>

Todd
 
if he is talking about a cs1000e, yes there is a Tlan. you shouldnt be able to ping the Tlan from 117. It has nothing to do with FTP

Mato' Was'aka
 
still have issue and the ftp server error log does show session open but file transfer fails..there must be a patch...
 
I am having the same issue on CS1Ke 5.5 whereas its failing when I do ftp backup. All login details to ftp server works.
Also I get an error

Starting CCBR backup to "/u/ccbr/ccbr.gz":
CCBR backup failed!
TEMU141
Not enough space for Unattended backup.
TEMU111
Error occured backing up internal data base

Rule 3 is automatic bkup initiated by edd

Starting Backup according to Rule 3
Backup mode: Automatic
Backup Rule type: FTP
Backing up reten.bkp
Starting database backup to "/u/bkdb/backup/tmp/":
Database backup failed!
TEMU141
Not enough space for Unattended backup.
TEMU062
Database backup to removable media failed
Automatic Backup according to rule failed!
 
You have to create new Rout (Gateway IP Address)in LD 117 if you dont have.

 
Kiosky

I have created a new route 0.0.0.0 FTP server IP but still doesn't work. Any help would be appreciated.

MJDAVE
 
Can you post your rout in LD 117 and ping the FTP IP address also. Try to check the FTP connection


SRPT4639
FTP to <IP address> failed on <command>, code=xxx,
attempt=xx, errno=0xXXXX."
Where Command may be:
bin
put <file name> <remote file name>
rename <old file name> <new file name>
open session
The specified FTP operation
to the specified IP address
failed.
Verify FTP connection / remote hard disk accessibility
Severity: Info
 
From EM

Host Identifier Host Name Host IP Address Ethernet Link Status Status Media Gateway
1 1 SECONDARY_ENET 137.135.128.254 Inactive Enabled 0
2 2 LOCAL_PPP_IF 137.135.192.4 -- Enabled 0
3 3 REMOTE_PPP_IF 100.1.1.1 -- Enabled 0
4 4 CC_CS 172.16.70.66 Active Enabled 0
5 NIL localhost 127.0.0.1 -- -- 0


Route Identifier Network IP Address Gateway IP Address Status Media Gateway
1 NIL 127.0.0.1 127.0.0.1 -- 0
2 NIL 172.16.70.64 172.16.70.66 -- 0
3 NIL 127.0.0.0 127.2.0.1 -- 0
4 1 0.0.00.0 172.16.70.94 -- 0

From CS

ld 117
prt route
Call Server
ID Network Gateway
1 0.0.00.0 172.16.70.94

Can ftp to to ftp server.

FTPsettings



Rule Number: ( 3 )
Rule Type: FTP
Only one backup rule of type Fixed Media Device or
Removable Media Device can be configured
Rule Name: CS1Kbkup
IP Address of FTP server: 172.16.8.101
Login Name:
Password:
Password Confirmation:
Path: \csk1000backup
Number of versions kept: 5

Date Time Type Name Mode of Initiation Issue EDD Sequence Number Status
10/01/2010 21:50 Automatic CS1KBKUP Man 0550J 204 Failed
09/01/2010 00:02 Automatic CS1KBKUP Auto 0550J 204 Failed
08/01/2010 00:02 Automatic CS1KBKUP Auto 0550J 203 Failed
06/01/2010 21:24 Automatic CS1KBKUP Auto 0550J 202 Failed
06/01/2010 19:14 Automatic CS1KBKUP Auto 0550J 201 Failed
06/01/2010 19:07 Automatic CS1KBKUP Auto 0550J 200 Failed
05/01/2010 00:01 Automatic CS1KBKUP Auto 0550J 199 Failed
31/12/2009 00:01 Automatic CS1KBKUP Auto 0550J 198 Failed

Looks like the CCBR.GZ is no even zipping itself.

If any one can help.

Thanx
MJDAVE14
 
Hi
I am not getting to this part of back up



Backing up reten.bkp to "/u/bkdb/backup/tmp/"
Database backup Complete!
BKR - Backup preparation to "/u/bkdb/backup/tmp/" completed
BKR - TAR Archiving "/u/bkdb/backup/tmp/" ...
completed
BKR - GZIP Compressing "/u/bkdb/backup/bkdata.tar" ...
100 percent completed
opening FTP session to remote server 10.88.11.41
SRPT4639
FTP to 10.88.11.41 failed on "open session", code=-1, attempt=1; errno=0x3006b.
Manual Backup according to rule failed!


Thanx for your support

MJDAVE14
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top