I am looking for a chart that list how much free memory is needed to upgrade to a particular version. I know the PCS number is what avaya goes by, but I just inherited a system that I don't trust. I'm not sure that the motherboard is in the correct box and the PCS number is actually correct. I would like to find a way to actually confirm that the upgrade will work. I was hoping the I could run a monitor trace and check the free memory that was available. Thoughts from anyone?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Free Memory on Monitor Trace 2
- Thread starter dthszn
- Start date
-
1
- #2
tanderson3733
IS-IT--Management
The only memory concerns are on 406v2 control units. When you open system monitor, look for the "FREEMEM=" in the first few lines, and if it starts with 4xxxxxxx then you have enough memory to go all the way to version 6. If it's in the 1xxxxxxx range then it's an earlier version without enough memory to upgrade past 3.2.
IP403, IP406v1 cannot go past 3.2 regardless of memory, IP412 can go up to 6.0, and of course the IP500 can go up to 6.0 as well.
IP403, IP406v1 cannot go past 3.2 regardless of memory, IP412 can go up to 6.0, and of course the IP500 can go up to 6.0 as well.
hairlessupportmonkey
IS-IT--Management
right near the begining of the trace, you should see MEM=xxxxxxxx
- Thread starter
- #5
-
1
- #6
- Thread starter
- #7
- Status
Similar threads